Ventilation accessories for installing ductwork systems for restaurant range hoods or mechanical ventilation systems.

Here you’ll find all the essential ventilation accessories for commercial kitchen range hoods needed to exhaust fumes to the outside.

Ducts, piping, flexible or rigid galvanized steel ducting, galvanized flat branch fittings, galvanized collars, galvanized elbows, roof caps specifically designed for professional kitchen range hoods, stainless steel baffle or impact filters, galvanized male or female connectors, mounting clamps, beveled mesh vent caps, mesh plugs, galvanized reducers, ventilation grilles, brackets, screws and fasteners, etc.

To ensure a successful installation, see our technical tips at the bottom of the page.

Affichage de 32 article(s)

Rigid, spiral-wound galvanized steel duct for ventilation and exhaust

Galvanized Sheath & Conduit

Rigid galvanized steel pipe, 1 meter

Ventilsogood

conduit1ml

20.00 Tax excluded

In stock

Galvanized steel spiral duct for mechanical ventilation systems (VMC) and range hoods - Dimensions: L 1000 mm- Diameter options: between D 80 and D 630 mm- Female fitting- Operating temperature: -30°C to +250°C- Fire rating A1- Use a mounting and sealing kit for the connection IMPORTANT NOTE: Supplied in 1- to 3-meter one-piece lengths depending on the...

Rigid galvanized duct for a ventilation system

Galvanized Sheath & Conduit

2-meter rigid galvanized steel pipe

Ventilsogood

conduit2ml

30.00 Tax excluded

In stock

2 linear meters of spiral galvanized steel ducting for a mechanical ventilation system (VMC) / range hood - Dimensions: L 2000 mm x Diameter selectable between 80 mm and 800 mm- Rigid, airtight, and durable- Operating temperature: -30°C to +250°C- Fire rating A1- Installs using a mounting and sealing kit (self-tapping screws + sealant cartridge and...

Galvanized Sheath & Conduit

3-meter semi-flexible conduit

Ventilsogood

gaineflex

12.00 Tax excluded

In stock

The semi-flexible tube allows it to be routed through tight spaces (suspended ceilings, awkward corners, etc.) - Dimensions: Length 3000 mm x Diameter selectable between 80 mm and 450 mm- Materials: aluminum- Operating temperature: -30°C to +250°C- Fire rating: A1- Fragile; once installed, it must not be moved IMPORTANT NOTE: Transporting the conduits...

Ventilation Accessories

Hardware and Sealing Kit

Ventilsogood

kitcartoucheeocryl

42.00 Tax excluded

In stock

A must-have among ventilation system accessories Kit includes: - One sealant cartridge—M1 fire rating - One roll of aluminum tape (5,000 mm long) and 50 mm wide - 30 small self-tapping screws (D4.8 mm) - 6 large self-tapping screws (for mounting the motor) - Allows you to secure network accessories together - Allow 3 screws per fitting (e.g., to secure...

frame / mounting brackets for cabinet motor

Ventilation Accessories

Mounting Frame for a Worm Gear Motor

Ventilsogood

bridmot

15.00 Tax excluded

In stock

Frame / Mounting Bracket for Worm Gear Motor. - Flange width: approximately 25 mm. - Various (internal) dimensions for different motor models: ~ 200 x 230: 7/7 19/19 181/181~ 200 x 300: 7/9 19/25 181/241~ 300 x 200: 9/7 25/19 241/181 ~ 260 x 300: 9/9 25/25 241/241~ 290 x 330: 10/10 28/28 270/270~ 350 x 390: 12/12...

Ventilation Accessories

Heavy-duty bracket / console—sold individually

Ventilsogood

console

35.00 Tax excluded

In stock

L-shaped bracket with galvanized steel reinforcement, 60 cm Sold individually

Insulated Clamp for Professional Ventilation Ductwork

Ventilation Accessories

Insulated Mounting Clamp

Ventilsogood

collierisolé

5.00 Tax excluded

In stock

Sound-insulating mounting clamp for supporting ventilation ducts and conduits. - Steel component with anti-vibration rubber gasket- Dimensions: Diameter options ranging from 160 to 630 mm- The mounting nut for the threaded rod accommodates two diameters: 8 and 10- Allow 1 clamp per 2 m of conduit for diameters between 160 and 250 mm, and 2 clamps per 2 m...

Ventilation Accessories

Cable ties (pack of 10)

Ventilsogood

collierisolé

20.00 Tax excluded

In stock

Monofil clamping collar for ventilation accessories. - Galvanized steel component- Dimensions: Diameter selectable between 160 and 560 mm- Wire diameter: 2 mm- Locking mechanism- Zinc-plated steel screw M4 x 60, hex head- Sold in packs of 10 Find all related products at the bottom of the page!

Range Hood Motor Mounting Kit – Foam Gasket & Hardware

Online only

Ventilation Accessories

Engine Installation KIT: Gasket + Hardware

Ventilsogood

kitposemoteur

9.00 Tax excluded

In stock

Mounting Kit and Foam Gasket for Stainless Steel Range Hood Motor – Sealing and Vibration Reduction Essential for professional installation, the mounting kit with foam gasket securely fastens your motor to the sheet metal of a stainless steel range hood or motor housing, while ensuring a perfect seal and significantly reducing noise. Benefits of the Motor...

Ventilation Accessories

Galvanized roof vent cap

Ventilsogood

chapeaugrill

19.00 Tax excluded

In stock

Roof vent cap for food trucks with pest-proof screen - Dimensions: Diameter options range from 160 to 800 mm- Installs on the roof with a male connector to attach it to the vent.- Secured using self-tapping screws + a gasket and/or tape Find all related products at the bottom of the page!

roof penetration cap, ventilation system

Ventilation Accessories

2-in-1 Roof Rack and Roof Crossbar

Ventilsogood

chapeau2en1

69.00 Tax excluded

In stock

Aesthetic, discreet, and quick-to-install pre-painted metal roof outlet - Pre-painted metal male fitting + flexible sheet- "Bordeaux" tile color - Dimensions: Diameter options ranging from 125 to 630 mm- Lead flashing: Flexible sheet to conform to the roof’s contours and provide a watertight seal- Support sheet metal (under the flashing) with mounting...

Ventilation Accessories

Ventilation Duct Outlet Shutter

Ventilsogood

volfac

60.00 Tax excluded

In stock

Outdoor exhaust vent for wall mounting or food trucks: discreet, attractive, and practical - Made of anthracite-gray painted aluminum and PVC: water-resistant- Dimensions: Choose the same diameter as your plumbing; the cover is slightly larger to allow you to conceal any “imperfections” in the outlet hole and secure it in place.- Thickness: 15 mm- Screws...

fasteners for professional ventilation systems

Ventilation Accessories

Network Hardware Kit, 6–10 m

Ventilsogood

kitvisserie

6.00 Tax excluded

In stock

Essential for connecting network components -30 x small self-tapping screws, 4.8 mm diameter- Allow 3 screws per fitting (e.g., to secure the conduit to a branch)- Allows you to install between 6 m and 10 m of network (depending on the fittings) Find all related products at the bottom of the page!

Cartridge of airtight sealant for sealing joints in ventilation systems

Ventilation Accessories

Sealing Cartridge for Air Ducts

Ventilsogood

cartoucheeocryl

12.00 Tax excluded

In stock

Sealing Cartridge for Air Distribution Systems High temperature (max 300°) - M1 fire rating. Sold individually. 310-ml cartridge. 1-year warranty.

Roll of aluminum adhesive tape for HVAC systems / ventilation

Ventilation Accessories

Aluminum tape

scotchalu

12.00 Tax excluded

In stock

Self-adhesive aluminum tape: essential for sealing the system - Fire rating: M1.- Dimensions: L 50,000 x D 50 mm- Allow approximately 1,000 mm per section- The tape is used in addition to self-tapping screws and a sealant cartridge Find all related products at the bottom of the page!

Shutter for a professional stainless steel range hood

Ventilation Accessories

Stainless Steel Cover Plate (L500 x H400 x D25 mm) for Range Hood

Ventilsogood

obturateur500x400

45.00 Tax excluded

In stock

Stainless Steel Shutter for Stainless Steel Range Hood - Made of 18/10 stainless steel- Plate with folded edges- Dimensions: L 500 x D 25 x H 400 mm- Replaces a filter or fills a gap between two- Essential for the hood’s proper operation: protects the motor from grease and heat, reduces the suction area to optimize suction power Find all related products...

Mounting kit for a turret on a professional ventilation duct

Roof fan Exhaust Systems for Restaurants & Smoke Exhaust

Turret Mounting Kit for Duct

SAFTAIR

kitfixtourelle

141.00 Tax excluded

In stock

Roof Turret Duct Mounting Kit: For easy and durable installation of the Saftair roof turret onto the duct - Duct mounting: for facade or roof outlets- Includes a pre-drilled mounting plate + 4 reinforcement brackets and 2 mounting clamps.- Dimensions for TH32/36/TH40/TH45: Kit frame: L 540 x W 540 mm (Hole diameter 400 mm)- Dimensions TH50/TH56: Kit...

Saftair side panel for TH36/40/45/50 turret

Roof fan Exhaust Systems for Restaurants & Smoke Exhaust

Roof turret skirting

SAFTAIR

COSTIERE

336.00 Tax excluded

In stock

Saftair mount for flat or sloped roofs. - Compatible with our exhaust turrets (except T11 and T25) or those from SAFTAIR or France air since 2022.- Can be adapted to other brands if the base of the exhaust turret is larger than the roof edge.- Supports a slope of up to 5%- 4 mounting points (bolted) for attaching the exhaust turret to the roof curb.- 3...

G4 grease filter with carbon filter housing

On sale!

Filter for a commercial range hood

Small G4 Filter with Frame for Charcoal Canister

Ventilsogood

G46cart

48.00 33.00 Tax excluded

In stock

G4 filter traps grease in a charcoal filter housing. - Fits 5- or 6-cartridge charcoal filters from the following brands Saftair,- Dimensions: W 610 x D 305 x H 45 mm- Sold complete with its metal frame- Must be cleaned regularly with hot water and degreaser- The more regularly the G4 filter is maintained, the more grease it traps and the better it...

G4 filter with frame for odor-control charcoal filter housing

Filter for a commercial range hood

Large G4 Filter with Frame for Carbon Filter Housing

Ventilsogood

G412cart

75.00 50.00 Tax excluded

In stock

Large-format G4 filter to trap grease in a carbon filter box. - Fits 9- or 12-cartridge charcoal filter units from the following brands Saftair, or certain motorized filter units- Dimensions: W 610 x D 610 x H 45 mm- Sold complete with its metal frame- Must be cleaned regularly with hot water and a degreaser- The more regularly the G4 filter is...

25-kg bag of granular activated carbon for the restaurant industry

On sale!

Ventilation Accessories

25-kg Bag of Activated Carbon for the Food Service Industry

Ventilsogood

25kgcharbon

195.00 170.00 Tax excluded

In stock

Refill for granular activated carbon cartridge (25 kg). - For refilling activated carbon cartridges- Standard cartridge = approximately 3.5 kg- CG54-type activated carbon- Captures restaurant odors- One bag fills approximately 6 cartridges Find all related products at the bottom of the page!

Roof housing for professional ventilation system outlet

Ventilation Accessories

Roof overhang: 250 to 500 mm

Ventilsogood

abergementoit

149.00 Tax excluded

In stock

Roof flashing ensures a watertight seal where the roof meets the wall. - For use on sloped roofs- Model to be adapted based on roof type: slope angle and roofing material- Can be trimmed to perfectly fit the shape of your duct (cylindrical)- Fits dimensions between 250 mm and 500 mm (see photos)- Complete the waterproofing with a tar-based waterproofing...

Domed cover to fit the engine into the hood

Ventilation Accessories

500x500 Curved Galvanized Cover Plate

obstubombé

55.00 Tax excluded

In stock

Curved cover for installing a motor in a hood that is too large to fit behind the filters.- Dimensions: 500 x 500- Replaces a filter or a flat cover measuring 500 x 500

cartridge for an odor-control charcoal filter

Coal bin

Cartridge with odor-removing activated carbon

Ventilsogood

cartouchecharbons

65.00 Tax excluded

In stock

Full activated carbon cartridge for activated carbon filter housing - Compatible with all our units:- Approximately 4 kg of odor-eliminating activated carbon:- Height: 40–41 cm:- Outer diameter: 14 cm:- Compatible with our carbon filters and those from the following brands Saftair, Ouestventil, Cairox, Ventileco, and certain models from Ventil.

Deck support leg with insulated clamp for duct mounting

Ventilation Accessories

Terrace Duct Support Foot

Ouestventil

piedsuppterras

18.00 Tax excluded

In stock

Galvanized steel support bracket for supporting ventilation ducts on a flat roof - Dimensions: 300 x 300 mm - Adjustable telescoping support leg from 230 to 430 mm - Insulated mounting clamp not included - M8 thread - For more options:Ventilation Accessories

Mounting Bracket for Range Hood & Ventilation System

Fire-resistant expanding foam

Ouestventil

moussecoupefeu

26.00 Tax excluded

In stock

One-component polyurethane foam 2-hour fire resistance, F400/120 standard Straw nozzle 750-ml cartridge (note: expands less than non-fire-rated foam) Related product:Expansive insulating foam

Mounting Bracket for Range Hood & Ventilation System

Strut mounting rail

Ventilsogood

railperfcranté

12.00 Tax excluded

In stock

STRUT mounting rail, perforated and notched, made of Sendzimir-galvanized steel - Made of Sendzimir-galvanized steel (SZ) - Perforated rail - Continuous centimeter graduations on the side - The distance from one end of the rail to the first perforation is always the same - Available lengths: 1 meter or 2 meters- 2 thicknesses: Width=41mm • Height=21mm •...

Mounting Bracket for Range Hood & Ventilation System

Expanding Insulation Foam

Ventilsogood

mousseisolaéro

14.00 Tax excluded

Last items in stock

Foam for filling cavities and insulating air duct systems, 750 ml. Single-component polyurethane foam—cures upon contact with air and the substrate.Contents: 750 ml Professional-grade quality—suitable for all substrates commonly found in construction: concrete, masonry, stone, plaster, wood, cement and mineral fiber concrete, polystyrene, polyester, rigid...

Mounting Bracket for Range Hood & Ventilation System

Perforated galvanized steel bracket

Ventilsogood

consolperf

15.00 Tax excluded

In stock

L-shaped bracket with galvanized steel reinforcement, 75 cm Bracket sold individuallyDimensions: 750 mmSteel Related product:Mounting rail

Ventilation Accessories

Square aluminum outdoor grill

Ventilsogood

grillaluextfix

85.00 Tax excluded

In stock

Fixed louvered grille: Outdoor vent designed to be recessed into the wall—discreet, attractive, and practical - Anodized aluminum component - Air intake or exhaust for ventilation systems - Wall-mounted - Available in sizes 300x300, 400x400, and 500x500 - When used as an air intake, it is recommended not to exceed 3 m/s to prevent water particles from...

Ventilation Accessories

Suspension cables + self-locking pulleys (4)

Ventilsogood

cabledesuspension

25.00 Tax excluded

In stock

Cable Suspension Kit with Locking Roller - Set of 12 ml (4 x 3 ml) of cable + 4 locking pulleys. - 1.5 mm diameter galvanized steel cables and Sufix side-release-type pulleys. - Applications: Piping, mechanical ventilation ductwork, air conditioning units, radiant panels, suspended ceilings, lighting, light fixtures, signage. - SUFIX roller: maximum load...

Ventilation Accessories

Support feet for worm gear motor with screws and silent blocks

Ventilsogood

piedsuppmotor

20.00 Tax excluded

In stock

Set of 2 support feet for a snail motor (7/7 to 12/12) for mounting the motor in an enclosure. - 2 galvanized snail motor mounting brackets- 6 sizes available- Bag of 6 small screws- 4 vibration dampers to be attached to the brackets (absorb vibrations)

Technical tips for properly sizing your ventilation system for your commercial kitchen.

The most important factor for the proper operation of a restaurant range hood is the diameter of the kitchen exhaust duct!

Even with the most powerful motor in the world, if the duct is too small, you won’t get the results you’re looking for! You wouldn’t install a Citroën 2CV exhaust pipe on a Porsche 911… Well, kitchen ventilation works the same way!

The maximum extraction capacity in your kitchen will be limited by the diameter of the galvanized pipe installed; the larger it is, the better the cooking fumes will be exhausted.

Here is a “theoretical” reference table for a restaurant range hood equipped with a dual-outlet centrifugal snail fan:

Galvanized pipe diameter = Maximum extraction capacity of the commercial range hood (for reference only)

160 = 800 m³/h (semi-professional hood for vacation rentals, private homes, reheating kitchens, etc.)
200 = 1,200 m³/h (~1–2 filters, 1 filter = 800 m³/h)
250 = 1,800 m³/h (~2–3 filters)
315 = 3,000 m³/h (~3–4 filters)
355 = 3,500 m³/h (~4–5 filters)
400 = 4,000 m³/h (~4–6 filters)
450 = 6,000 m³/h (~7–9 filters)

Be sure to install an air intake in the restaurant kitchen to compensate for the extraction from the commercial range hood; its cross-sectional area must be at least 70% of the extraction cross-sectional area!

Finally, to set up a restaurant ventilation system from your commercial range hood to the exterior outlet, you will need:

- agalvanized flat connector, galvanized collar, or flange (to connect the hood to the duct)
- agalvanized duct, galvanized tube, or galvanized conduit (rigid or flexible)
- a 45° or 90° galvanized elbow (to connect it to the galvanized flat spigot, add a galvanized female coupling)
- agalvanized male couplingbetween two galvanized ducts
- insulated suspension clamps every 2 m (+ 8 or 10 mm threaded rod )
- aluminum tape and fire-resistant sealant cartridge
- on the roof: galvanizedcapor 2-in-1 roof outlet cap (includes roof waterproofing; quick and aesthetically pleasing)
- on the facade: galvanized mesh pest-proof cap or galvanized mesh rain and pest guard(rain and pest-proof) or self-opening slatted facade shutter.

Does all this seem a bit complicated :-)? Draw up a simple sketch and take a few photos, then send them to us, and we’ll prepare a customized quote for the future ventilation system for your restaurant range hood!