Aluminum tape

Roll of aluminum adhesive tape for HVAC systems / ventilation
Aluminum tape, vue 2
Roll of aluminum adhesive tape for HVAC systems / ventilation
Aluminum tape, vue 2

The self-adhesive aluminium foil tape seals ductwork joints on ventilation systems: an essential item for any mechanical ventilation or commercial kitchen hood installation, used alongside self-tapping screws. 50 m roll, M1 fire rating.

  • Dimensions: 50,000 x 50 mm (length x width)
  • Fire rating: M1
  • Guide consumption: approx. 1 m per joint
  • Use: complements self-tapping screws and sealant
  • Package weight: 1 kg
In stock
Quantity
12.00 Tax excluded
14,4 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The Aluminum tape is an aluminium adhesive tape designed to seal professional ventilation ductwork: ducts, joints and connections on mechanical ventilation, commercial kitchen hood or extraction fan box installations. This roll measures 50 m long by 50 mm wide and carries an M1 fire rating.

Why use aluminium tape on a ventilation system

On a ductwork system, joints remain the weak point: this is where air escapes and moisture gets in. The Aluminum tape seals these joints in addition to self-tapping screws and sealant, not instead of them. It's applied by hand, with no special tools, and conforms to shapes even on slightly awkward joints. As a guide, allow around 1 m of tape per joint, depending on your system's configuration.

Technical specifications

Length 50,000 mm (50 m)
Width 50 mm
Fire rating M1
Guide consumption approx. 1 m per joint
Package weight 1 kg
Warranty 1 year

Installation and fitting

The aluminium tape is applied directly onto the duct, around the joint, after mechanical fixing with self-tapping screws and application of sealant. It is not designed to hold the joint mechanically on its own: it seals the connection as a complement, not a replacement, for the fixing.

Points to check before ordering

  • Tape width: this roll is 50 mm wide, check it matches your duct diameter and the overlap width required.
  • Quantity needed: allow approximately 1 m per joint as a guide; the number of joints on your system determines the number of rolls required.
  • Complementary use: this tape is applied in addition to self-tapping screws and a sealant cartridge, not on its own.
  • Intended use: designed for sealing ventilation systems (mechanical ventilation, kitchen hoods, extraction fan boxes), not for chimney flues or high-temperature stainless steel liners.

Goes well with

For a complete, airtight installation, consider adding the fixing and sealing kit or the hood/extraction box fitting kit (threaded rods and fixings). Find all related products at the bottom of the page.

Product Details

scotchalu
Products
Fastening
Warranty
1 year
Package weight
1 kg
0657968915411

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What is aluminium tape used for on a ventilation system?

Aluminium tape is used to seal joints and connections on ductwork, whether on mechanical ventilation, commercial kitchen hood or extraction fan box installations. It is applied alongside self-tapping screws and a sealant cartridge, never on its own, to close off air leak points.

How much aluminium tape should I allow for my job?

Allow around 1 m of aluminium tape per joint as a guide. The exact quantity depends on the number of joints and elbows in your system: it's best to count your joints before ordering the number of rolls you'll need.

Is aluminium tape suitable for a chimney flue or stainless steel liner?

No, this aluminium tape is designed for sealing ventilation systems (mechanical ventilation, kitchen hoods, extraction fan boxes), not for chimney flues or stainless steel liners exposed to high temperatures. For these applications, a dedicated, certified product is required.

Does aluminium tape replace the fixing screws on a joint?

No, aluminium tape does not replace mechanical fixing. It is used alongside self-tapping screws and a sealant cartridge, to seal the joint once it has been fixed in place.