Air Supply/Return Grille 425 x 75
The Air Supply/Return Grille fits onto a circular galvanised duct and regulates airflow via an adjustable opening level, for a flow rate of 100 to 400 m³/h depending on setting.
- Dimensions: L 425 x H 75 mm
- Compatibility: duct from D200 to D400 mm
- Function: dual-function grille (supply or extract)
- Adjustable flow rate: 100 to 400 m³/h depending on opening
- Manufactured in: Europe
Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
The Air Supply/Return Grille for circular ducting fits onto a galvanised duct and serves both for fresh air supply and for extracting stale air, with an adjustable flow rate of 100 to 400 m³/h.
Dual-function grille for galvanised ventilation ductwork
This dual-function grille works on both supply and extract air networks on a circular galvanised duct. It slides directly onto the duct without major modification to the system, making it a practical accessory to complete or repair an existing ventilation installation. The opening level can be adjusted to set the flow rate to suit your requirements, a real benefit when balancing several outlets on the same network.
Technical specifications
| Specification | Value |
|---|---|
| Dimensions | L 425 x H 75 mm |
| Duct compatibility | D200 to D400 mm |
| Type | Dual-function grille (supply/extract) |
| Flow rate | 100 to 400 m³/h depending on opening |
| Manufactured in | Europe |
| Weight | 5 kg |
Use and compatibility
This supply/return grille is suitable for professional mechanical ventilation systems and premises ventilation networks, whether in catering, commercial or workshop settings, wherever a circular galvanised duct of D200 to D400 mm needs to terminate in an adjustable air outlet or inlet. The adjustable opening level allows you to set the flow rate between 100 and 400 m³/h, a useful reference point for balancing a network with several grilles or adapting the flow to a specific room.
Installation and connection
The grille fits onto a circular galvanised duct of compatible diameter, without any complex cutting of the existing network. As with any ventilation accessory, the upstream electrical connection (motor, fan box) must be carried out by a qualified professional in order to keep the warranty valid.
Points to check before ordering
- Check the exact diameter of your duct: this grille covers the D200 to D400 mm range; outside this range it will not be suitable.
- Determine whether you need a supply or extract function: the dual-function grille handles both, but bear in mind the overall balance of your network.
- Estimate the flow rate required for your room or network: the adjustable range of 100 to 400 m³/h should match your actual requirement, which also depends on elbows and duct length.
- Check the available space at the installation point (L 425 x H 75 mm), particularly where it exits through a façade or suspended ceiling.
Frequently bought with
To extend or connect your network, see our 2-metre rigid galvanised steel duct. You can also browse our full range in the Ventilation accessories category.
Product Details
- Products
- Outdoor Outings
- Products
- Grille / Air Inlet / Diffuser
- Manufacturing
- Made in Europe
- Package weight
- 1 kg
You might also like
8 other products in the same category:
Customers who bought this product also bought:
Frequently asked questions
What is the difference between supply and extract on this grille?
This grille is dual-function: it handles both supply (fresh air inlet) and extract (stale air outlet) on the same circular galvanised duct. Its adjustable opening level lets you set the flow rate according to the function required in your network.
What duct diameter is compatible with this grille?
The Air Supply/Return Grille fits circular galvanised ducts from D200 to D400 mm. Check the exact diameter of your duct before ordering: outside this range, the grille will not be suitable.
What flow rate can this grille handle?
The flow rate is adjustable from 100 to 400 m³/h depending on the opening level selected. This figure is indicative only: it also depends on the length of your ductwork, the number of elbows and the overall operating point of the installation.
Is this grille suitable for a commercial kitchen?
Yes, this galvanised grille fits onto professional mechanical ventilation systems in catering as well as commercial premises. Check the diameter of your duct and the flow rate required for your room before fitting it to your network.
How do I fix the grille to my existing duct?
The grille fits onto a circular galvanised duct of compatible diameter, without major modification to the network. The electrical connection of the associated motor or fan box must be carried out by a qualified professional in order to keep the warranty valid.