2-meter rigid galvanized steel pipe
The 2-meter rigid galvanized steel pipe fits your mechanical ventilation extract systems and commercial kitchen hoods, with a temperature rating of -30°C to +250°C. Available from 80 mm to 800 mm in diameter.
- Length: 2000 mm
- Diameter: from 80 mm to 800 mm
- Fire rating: A1
- Package weight: 8 kg
- Female fitting, rigid spiral-wound construction
Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
The 2-meter rigid galvanized steel pipe is a spiral-wound duct designed for mechanical ventilation extract systems and commercial kitchen extraction, available in diameters from 80 mm to 800 mm, with a temperature rating of -30°C to +250°C.
Technical specifications of the 2-meter galvanized duct
| Specification | Value |
|---|---|
| Length | 2000 mm (2 linear metres) |
| Available diameter | From 80 mm to 800 mm (80, 100, 125, 160, 200, 250, 315, 355, 400, 450, 500, 560, 630, 710, 800 mm) |
| Operating temperature | -30°C to +250°C |
| Fire rating | A1 |
| Package weight | 8 kg |
| Fitting type | Female |
| Fixing | Fixing and sealing kit: self-drilling screws, sealant cartridge, aluminium tape |
A rigid duct built to last
The spiral-wound galvanized steel construction stands up to the prolonged demands of an extraction system: heat, grease and moisture. Galvanized steel offers good corrosion resistance, a real advantage in the environment of a restaurant, fast-food outlet, kebab shop, sandwich bar or pub kitchen, where the system runs throughout service without faltering. The smooth internal surface limits pressure losses and allows air to flow without placing extra strain on your extract fan.
Use in mechanical ventilation systems and commercial kitchen hoods
This rigid galvanized duct can be fitted on a mechanical ventilation system as well as on the extraction run of a commercial kitchen hood. Its 2-metre length makes it easier to handle on site and to connect to other sections to build up the required duct run. Steel, being non-combustible, offers better fire resistance than alternative materials, and its industrial look suits exposed installations.
Installation and connection
The duct is fixed using a dedicated kit: self-drilling screws, sealant cartridge and aluminium tape to seal the joints between sections. It can be cut to size or connected to other 2-metre lengths via a coupling to reach the required duct run. If stock shortages require an alternative configuration, it may be supplied as 2 x 1 linear metre with a connector, or as a 3-metre length. See our installation tutorials on YouTube: https://www.youtube.com/@ventilsogood-cee
Points to check before ordering
- The exact diameter required for your hood or existing ductwork: from 80 mm to 800 mm depending on your needs. As a general guide, a smaller diameter suits sanitary mechanical ventilation, while a larger diameter suits high-output kitchen hoods.
- The total duct run length to be covered, to work out the number of 2-metre sections and connectors required.
- The compatibility of the chosen diameter with your extract fan or roof extract fan.
- The appropriate fixing and sealing kit (screws, sealant, aluminium tape) for a clean installation.
- The condition of the duct on receipt: see the important note below regarding transport.
IMPORTANT NOTE: transporting galvanized ducts can cause dents in the sheet metal, particularly at the ends. It is almost impossible to receive a length in perfect condition. Where the dents are minor, there is no need to reject the product: the ends reshape easily, and a minor dent does not cause pressure loss in the system. Unless the length is completely crushed or folded over itself, the goods will be considered compliant.
Often bought with
Product Details
A10
- Diameter
- Available Length
- 2 meters
- Products
- Sheath/Conduit
- Package weight
- 8 kg
0657968563377
You might also like
8 other products in the same category:
Customers who bought this product also bought:
Frequently asked questions
What diameter should I choose for my 2-meter galvanized duct?
The diameter depends on your existing ductwork and the airflow to be extracted: it should match the outlet diameter of your hood or extract fan. The 2-meter rigid galvanized steel pipe is available from 80 mm to 800 mm depending on your needs, so check your installation before ordering.
Can several 2-meter ducts be connected together?
Yes, the 2-meter rigid galvanized steel pipe, supplied with a female fitting, can be connected to other sections using a male galvanized connector to reach the required duct run length. Joints are sealed using a sealant cartridge and aluminium tape.
The duct arrived dented, is this normal?
Transporting galvanized steel ducts often causes dents in the sheet metal, particularly at the ends. No need to worry, this can easily be tapped back into shape with a hammer :-) A minor dent does not cause pressure loss in the system. The product is only considered non-compliant if the length is completely crushed or folded over itself.
What heat resistance does this galvanized duct offer?
The rigid galvanized steel duct has an operating temperature range of -30°C to +250°C and carries an A1 fire rating, as steel is a non-combustible material.
Is this duct suitable for a commercial kitchen hood?
Yes, the 2-meter rigid galvanized steel pipe can be fitted on extraction systems for commercial kitchen hoods as well as mechanical ventilation systems, in the diameter suited to your installation.