Galvanized guillotine
Galvanized guillotine
Adjust the airflow of your extraction hood with this galvanized steel guillotine, fitted directly at the extraction outlet.
Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
The Galvanized guillotine is a manual damper made from galvanized steel that fits into the hood, at the extraction outlet, to adjust the airflow drawn by your fan. A simple, robust accessory, designed for installers and catering trades who want to fine-tune their extraction without redoing the whole ductwork.
Technical specifications of the Galvanized guillotine
| Specification | Value |
|---|---|
| Material | Galvanized steel |
| Function | Airflow adjustment by sliding |
| Weight | 1 kg |
| Warranty | 1 year |
Use and compatibility
This guillotine is positioned at the extraction outlet of the commercial kitchen hood, upstream or at the level of the extraction ductwork. By sliding it, you reduce or increase the airflow passage area, allowing you to adjust the actual extracted airflow without touching the fan. It's the practical tool for correcting a draw that is too strong or too weak, for example after changing a double-inlet centrifugal fan or modifying the ductwork.
Points to check before ordering
- Check the diameter or cross-section of your extraction outlet before purchasing, to make sure the guillotine fits your existing ductwork.
- Check the accessibility of the fitting point: the guillotine must remain operable once installed so you can easily adjust the airflow.
- Consider the seal around the guillotine fixing to avoid unwanted pressure losses in your ductwork.
- If your ductwork already has a lot of elbows or length, keep in mind that adjusting the guillotine adds to the existing pressure losses: proper overall ductwork sizing remains the basis.
Pair with
- 2 metre rigid galvanized steel duct, to complete your ductwork
- 90° T-piece in galvanized steel, for your ductwork connections
- 6 to 10m ductwork fixing kit, for fixing the whole assembly
Product Details
- Products
- Cork
- Warranty
- 1 year
- Package weight
- 1 kg
You might also like
8 other products in the same category:
Customers who bought this product also bought:
Frequently asked questions
What is the Galvanized guillotine used for?
The Galvanized guillotine is a manual damper fitted at the extraction outlet of the hood. By sliding, it reduces or increases the airflow passage area, allowing you to adjust the actual extracted airflow without working on the fan.
Does the Galvanized guillotine fully close the air passage?
The available data for this reference does not specify a sealing level for full closure. Its main function remains airflow adjustment, to be checked against your need for full or partial shut-off.
What diameter of guillotine should I choose for my duct?
Check the cross-section of your extraction outlet or duct before ordering to ensure compatibility. This information should be confirmed at the time of purchase according to your existing ductwork.
Can the Galvanized guillotine be fitted on an existing spiral duct?
The Galvanized guillotine fits at the extraction outlet of the hood. For integration onto an existing spiral ductwork system, check the cross-section compatibility and the accessibility of the fitting point before ordering.