The 10-meter flexible CMV duct is a flexible aluminum and polyester duct used to connect a professional CMV system or air supply system in difficult-to-reach areas, with a diameter ranging from 80 to 630 mm.
Why choose a flexible duct rather than a rigid duct
Its flexible nature makes it easier to route through drop ceilings, utility ducts, or around complicated corners—where a rigid galvanized duct would require multiple elbows and fittings. It bends to go around obstacles without disrupting your system’s airflow and reduces the number of fittings needed on a job site. It is equally suitable for a mechanical ventilation system as it is for a household range hood exhaust system, provided the temperature and diameter meet the requirements.
Technical Specifications
| Specification |
Value |
| Length |
10,000 mm (shipped compressed) |
| Available Diameters |
80, 100, 125, 160, 200, 250, 315, 355, 400, 450, 500, 560, 630 mm |
| Materials |
aluminum and polyester |
| Operating temperature |
-30 °C to +250 °C |
| Fire rating |
M0 |
| Installation |
Indoor use only |
| Weight |
4 kg (approximately, depending on the selected diameter) |
Installation and Connection
This conduit is intended for indoor installation only; it is not suitable for outdoor or underground use. It connects to the network inlet and outlet using fittings appropriate for the selected diameter and is secured with aluminum tape to ensure the joints are watertight. It is delivered in a compacted 10-meter length and is then stretched to fit the actual route: be sure to allow for a little extra length if your route includes several changes in direction, as the conduit stretches less than a straight pipe once bent.
Things to check before ordering
- The diameter of the existing or planned plumbing system, to select the correct part number from the 13 available diameters
- The actual length required once the route is mapped out, taking bends into account
- Temperature compatibility with the intended use (mechanical ventilation, range hood, forced-air ventilation)
- Compliance with indoor installation requirements: this duct is not designed for outdoor use
- The connectors and aluminum tape required at both ends to ensure a watertight joint
To be used with
For a straight section with no clearance constraints, a rigid galvanized steel duct remains an option to consider, depending on the configuration of your system.