The commercial stainless steel extraction hood pack combines a standard stainless steel hood, a remote motor housing and a fan speed controller, to effectively capture cooking fumes while keeping the double-inlet centrifugal fan away from the cooking line. Available in lengths from 1 to 6 metres.
Why choose a remote motor housing
Placing the motor in a remote housing rather than directly on the hood changes a lot in day-to-day use. The motor noise moves away from the cooking line, grease and heat from the plancha or fryer no longer attack it directly, and the hood canopy keeps a lower profile. It's the preferred setup for kitchens that want to preserve working comfort without sacrificing extraction power.
Technical specifications
| Specification |
Value |
| Available lengths |
1 to 6 m (1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 m) |
| Hood height |
450 mm, canopy drop 300 mm |
| Power supply |
230V single phase |
| Package weight |
70 kg min. |
| Warranty |
1 year - service life over 10 years |
| 400°C/2h smoke extraction compatibility |
NOT compatible |
Motor housing airflow by hood length
| Hood length |
Motor housing |
Airflow |
Ductwork diameter |
Speed controller |
| 1 m and 1.5 m |
7/7 |
1850 m³/h |
Ø250 mm (collars included) |
4.5 A |
| 2 m and 2.5 m |
Motor housing |
2600 m³/h |
Ø315 mm (collars included) |
4.5 A |
| 3 m and 3.5 m |
9/9 |
3500 m³/h |
Ø355 or 400 mm (collars included) |
8 A |
| 3.5 m, 4 m and 4.5 m (in 2 modules) |
10/10 |
Motorised housing |
Ø400 mm and 2 x Ø315 inlets on the hood (collars included) |
8 A |
| 5 m, 5.5 m and 6 m (in 2 modules) |
12/12 |
6000 m³/h |
Ø450 mm and 2 x Ø355 inlets on the hood (collars included) |
8 A |
Hoods of 4 m, 4.5 m, 5 m, 5.5 m and 6 m are delivered in two modules.
How the hood is delivered
The hood is delivered flat-packed, boxed, ready to assemble, with stainless steel filters, stainless steel blanking plates and stainless steel drain plug already included. From 3.5 m upwards, it arrives in two modules to assemble, designed to fit through doorways and make handling easier on site. Inlet and outlet collars are included with every version, to be fitted if needed depending on your ductwork.
Points to check before ordering
- The hood length matches your cooking line (plancha, fryer, oven, range): each length comes with a motor housing sized for the right airflow.
- The planned ductwork diameter (Ø250 to Ø450 mm depending on length) is compatible with your existing installation or ducting works.
- For lengths of 4 m and above, the hood has two duct inlets on the main ductwork: check that your roof or duct layout allows for this.
- The pack is not compatible with a 400°C/2h smoke extraction system: if your project requires this rating, you should look at a different range.
- Ducts and connection accessories are not supplied with the pack, and must be sourced separately.
Goes well with
Installation guide at télécharger ici
See our full range of dynamic extraction hoods, or for smaller kitchens, our compact hood pack for food trucks.