Galvanized roof vent cap

galvanized steel roof vent cap
Galvanized roof vent cap
galvanized steel roof vent cap
Galvanized roof vent cap

The galvanized roof vent cap protects your ventilation duct from the weather and pests, with a built-in protective mesh guard and a female connection ready to take an elbow, a reducer or a flexible connector, for installation on a roof or food truck in just a few minutes.

  • Diameter: from 160 to 800 mm, available in various sizes
  • Material: galvanized steel, corrosion resistant
  • Pest-proof mesh guard: built into the cap
  • Connection: female (a male connector or flexible connector is needed for a straight duct)
  • Fixing: self-tapping screws, sealing gasket and/or sealing tape
  • Weight: 5 kg (packaging excluded)
Diameter
In stock
Quantity
19.00 Tax excluded
22,8 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The galvanized roof vent cap is a termination fitting for ventilation ducting, made from galvanized steel and fitted with a pest-proof mesh guard. It is fitted on a roof or on a food truck, with a female connection that fits over an elbow, a reducer or a connector fitted to your duct.

Roof and food truck vent cap with pest-proof mesh guard

On a ventilation job, the roof outlet is often the part that gets overlooked, until the day a bird or a rodent lets itself into the duct. This cap is designed to stop exactly that: its protective mesh guard keeps pests out while still letting air flow through. The galvanized steel shrugs off rain, snow and bad weather, and its smooth surface is easy to clean, a real plus when access to the roof isn't the most pleasant part of maintenance.

Technical specifications

Specification Value
Available diameters 160, 200, 250, 315, 355, 400, 450, 500, 560, 630, 710, 800 mm
Material Galvanized steel
Protection Built-in pest-proof mesh guard
Connection Female, connects to an elbow, a reducer or a connector
Fixing Self-tapping screws, sealing gasket and/or sealing tape
Weight 5 kg

Use and compatibility

This roof cap suits any professional ventilation system requiring a weatherproof roof outlet: commercial kitchen extraction, mechanical ventilation for commercial premises, or installation on a food truck. The diameter must match your existing duct exactly: no reducing or last-minute adapting on the accessory side.

Installation and connection

Pay attention to the direction of connection: the cap is female. It cannot be fitted directly onto a straight duct, you will need a male connector or, easier to fit, a flexible connector between the cap and your duct. It does, however, connect directly to a 45° or 90° elbow or to a reducer, with no intermediate fitting required. It is then fixed in place using self-tapping screws, with a sealing gasket and/or sealing tape depending on the roof surface. The cap can be fitted on most roof types (tile, sheet metal, flat roof) and on a food truck roof penetration. Make sure to properly seal around the roof penetration to avoid any water ingress.

Points to check before ordering

  • The exact diameter of your duct: the cap must be ordered in the same diameter, with no reducing.
  • The direction of the connection: the cap is female, so plan for a male connector or a flexible connector if you are arriving with a straight duct.
  • The type of roof (tile, sheet metal, flat roof, food truck) to plan the fixing method.
  • The condition of the existing sealing gasket if you are replacing an old cap.
  • For high airflow rates, an undersized diameter can cause excess pressure and noise: check consistency with the existing ductwork before ordering.

Goes well with

A well-protected roof duct outlet means fewer worries about pest intrusion and water damage over the long term: order the diameter that matches your system and you're all set.

Product Details

Ventilsogood
chapeaugrill
Diameter
Products
Hat
Products
Outdoor Outings
Package weight
10 kg
0657968910669

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What diameter of roof cap should I choose?

The galvanized roof vent cap must match the diameter of your ventilation duct exactly, with no reducing or adapting. It is available from 160 to 800 mm. If in doubt, measure the outside diameter of your existing duct before ordering.

Does the cap connect directly onto a straight duct?

No, the galvanized roof vent cap is female: it does not connect directly to a straight duct. You will need to add a male connector, or, easier to fit, a flexible connector. It does, however, connect directly to a 45° or 90° elbow or to a reducer.

Does the pest-proof mesh guard reduce the airflow?

The mesh guard built into the cap is there to stop rodents and birds getting into the duct. The pressure loss caused by this guard is minimal given its size.

How is the roof vent cap installed?

The cap is fixed to the roof using self-tapping screws, with a sealing gasket and/or sealing tape depending on the surface. A male connector is needed to connect it to a duct. Installation requires no work on the electrical system.

Is this cap suitable for a food truck?

Yes, the galvanized roof vent cap can be fitted on a standard roof as well as on a food truck, provided the duct diameter is matched and the available space on the vehicle roof is checked before fitting.