The CLASSIC ANTI-ODOR Range Hood Package is a complete extraction solution with activated carbon filtration, designed for commercial kitchens where the air outlet is on a front facade or in a densely populated area. It combines a stainless steel range hood, an odour control filter unit and a speed controller, for lengths from 1 to 4 metres (other sizes available on request).
An anti-odour package designed to reduce noise in the kitchen
This package combines a commercial kitchen hood in stainless steel, a carbon cartridge filter unit and a single-phase fan speed controller. On the 2.5 m, 3 m, 3.5 m and 4 m lengths, the motor is housed in a separate, remote fan box, away from the carbon filter unit. On the 1 m, 1.5 m and 2 m lengths, the motor is built directly into the carbon filter unit. Moving the motor further from the hood reduces noise levels and wear. The activated carbon traps odour molecules and significantly reduces the smell of cooking fumes released, while a G4 pre-filter protects the cartridges from grease build-up.
Technical specifications
| Specification |
Value |
| Lengths available |
1 m, 1.5 m, 2 m, 2.5 m, 3 m, 3.5 m, 4 m |
| Hood dimensions (1 to 2 m) |
L 1000/1500/2000 x D 1000 x H 450 mm, front skirt H 300 mm |
| Hood dimensions (2.5 m) |
L 2500 x D 1000 x H 450 mm, front skirt H 300 mm |
| Hood dimensions (3 to 4 m) |
L 3000/3500/4000 x D 1000 x H 450 mm, front skirt H 300 mm, 1 or 2 modules |
| Motor (1 to 2 m) |
Integrated Nicotra motor, 2600 m³/h, 230V, 300W |
| Motor (2.5 m) |
Remote fan box 9/9, 3500 m³/h, 230V |
| Motor (3 to 4 m) |
Remote fan box 12/12, 6000 m³/h, 230V |
| Speed controller (1 to 2 m) |
230V, 4.5A, light switch |
| Speed controller (2.5 to 4 m) |
230V, 8A, light switch |
| Carbon filtration |
5 to 12 cartridges depending on length, G4 pre-filter |
| Power supply |
230V single-phase |
| Manufacturing |
Made in France |
| Warranty |
1 year |
| Weight |
90 kg (parcel 135 kg) |
Which kitchens is this anti-odour package suited to?
This package is designed for commercial kitchens that do not have a roof extract outlet, or that want to eliminate the risk of external odours. The activated carbon treats cooking odours rather than discharging them through an external duct. Please note: this package does not meet F400 fire resistance requirements (400°C / 2 hours) and may not suit the specifics of your ductwork. We recommend you contact us before ordering to confirm the configuration suited to your kitchen.
Installation and connection
On the 1 to 2 m packages, the filter unit's inlet and outlet are 315 mm in diameter. On the 2.5 m package, we recommend ductwork of at least D 315, ideally D 355 mm for better performance. On the 3 to 4 m packages, the carbon filter unit's inlet and outlet should be made up in 400 mm diameter, and the remote fan box is supplied with two 400 mm inlet/outlet spigots to fit if required. An installation guide is available to download here. Only the electrical connection must be carried out by a qualified electrician for the warranty to apply.
Points to check before ordering
- Measure your cooking line and allow for a hood overhang of at least 10 cm on each side.
- Check the space available for the remote fan box (up to 700 x 700 x 700 mm on the 3 to 4 m lengths): it is often installed in a loft space or nearby plant room.
- Check the ductwork diameter required for your chosen length (315 mm or 400 mm) before ordering your connection accessories.
- Confirm that your installation does not require smoke extraction or F400 compliance, as this package is not certified for these uses.
- Keep in mind that actual airflow also depends on duct length, elbows and the make-up air supply in your kitchen.
Goes well with
Need a different configuration? Take a look at our direct-drive range hood package range, our remote motor range hood package without carbon filter, or our compact package for food trucks.