Cable ties (pack of 10)

ventilation duct clamp
Video
ventilation duct clamp

The wire duct clip provides a secure hold for your galvanised ventilation ducts and fittings, from 160 mm to 630 mm in diameter. Sold in a pack of 10, it's the simple, hard wearing essential for any installation.

  • Material: galvanised steel
  • Wire diameter: 2 mm
  • Locking: M4 x 60 hex head screw
  • Diameters available: from 160 to 630 mm
  • Made in: France
Diameter
In stock
Quantity
20.00 Tax excluded
24 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The duct clip for ventilation ductwork is a fixing component in galvanised steel that provides a secure hold for galvanised fittings and pipework, available in diameters from 160 to 630 mm, sold in a pack of 10 units.

Wire duct clip for galvanised pipe: a sturdy classic

This duct clip, also known as a wire clip, is designed for galvanised ductwork ventilation systems. Its 2 mm diameter galvanised steel wire wraps around the pipe and tightens via a hex head screw, for a firm hold with no play. It's the kind of fitting you keep in your toolbox before a job, simple, reliable, and built to last.

Technical specifications

Specification Value
Material Galvanised steel
Wire diameter 2 mm
Locking Galvanised steel screw M4 x 60, hex head
Diameters available 160, 200, 250, 315, 355, 400, 450, 500, 560, 630 mm
Packaging Pack of 10 units
Made in France

Use and fitting

The duct clip fits directly onto a rigid galvanised steel duct or a semi-flexible duct, to secure a joint, fix an elbow or stabilise a ventilation fitting on its support. Tightening is done via the screw, with no special tools required beyond a spanner sized to the hex head. It's a cost effective way to secure an installation without adding complex extra parts.

Points to check before ordering

  • Measure the outside diameter of the duct or fitting to be secured precisely: a clip that's too small or too large won't tighten properly.
  • Check that the diameter you need is included in the range on offer (160 to 630 mm) before placing your order.
  • Work out how many clips you'll need across the whole system: they're sold in packs of 10, so order enough for multiple joints.
  • If your installation requires anti vibration mounting or fitting onto threaded rod, this wire duct clip isn't designed for that purpose: please ask us about a dedicated support solution before ordering.

Goes well with

This clip pairs naturally with a 2 metre rigid galvanised steel duct, a 3 metre semi-flexible duct or a 90° galvanised elbow to complete your ventilation system.

Product Details

Ventilsogood
collierisolé
Diameter
Products
Fastening
Manufacturing
Made in France
Package weight
200 grams
0657968932821

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What diameter duct clip should I choose for my ventilation duct?

Measure the exact outside diameter of your duct or fitting before ordering. This duct clip is available in several sizes, from 160 to 630 mm, to suit most galvanised ducts used in professional ventilation systems.

How does this duct clip lock in place?

The clip tightens using a galvanised steel M4 x 60 hex head screw. Simply tighten the screw until you get a firm hold around the duct or fitting, no complex tools required.

How many clips come in a pack?

The duct clip is sold in a pack of 10 units, in a single diameter of your choice from the range available. Make sure to order enough packs for the number of joints you need to secure on your system.

Is this clip suitable for anti vibration mounting on threaded rod?

No, this wire duct clip in galvanised steel is designed for direct tightening around a duct or ventilation fitting, not for suspension on threaded rod with acoustic isolation. For this type of mounting, please contact our team about a dedicated support solution.