PREMIUM Pack: Rectangular Professional Motorised Commercial Hood 220V/230V
The PREMIUM Pack motorised commercial kitchen hood is an all-stainless-steel extraction hood, supplied with its double-inlet centrifugal fan and fan speed controller, designed for restaurants and open kitchens that want proper fume containment without compromising on finish. Available from 1 to 3 metres long.
A premium hood for kitchens on display
This commercial kitchen hood is built with all-stainless-steel construction and premium components: stainless steel filters, stainless steel end caps, stainless steel drain screw, reinforced fixings. It fits just as well in an open-plan kitchen facing the dining room as in the back-of-house of a fine dining restaurant, with a finish that holds up even under customers' eyes.
Technical specifications
| Specification |
Value |
| Power supply |
220V / 230V single phase |
| Motorisation |
Double-inlet centrifugal fan 7/7 |
| Standard motor airflow |
1500 m³/h |
| Motor options |
2600 m³/h or 3000 m³/h |
| Available lengths |
1 m, 1.5 m, 2 m, 2.5 m, 3 m |
| Depth |
1000 mm |
| Height (front valance) |
450 mm |
| Stainless steel filters |
500 x 400 mm, 2 to 4 depending on length |
| Equipment included |
230V speed controller, light switch, EVG |
| Weight |
90 kg |
| Warranty |
1 year |
Which motor and which duct sizing depending on hood length
The choice of motor and duct diameter depends directly on the length of your PREMIUM hood. For 1 m and 1.5 m versions, the standard 7/7 motor at 1500 m³/h is generally sufficient, with a duct diameter of 250 (250 mm minimum recommended). For longer versions, the sizing changes:
- 2 metres: duct diameter 315 (minimum 250), standard 1500 m³/h motor
- 2.5 metres: duct diameter 355 (minimum 315), ideally 2600 m³/h motor
- 3 metres: duct diameter 400 (minimum 355), ideally 3000 m³/h motor
These duct sizing guidelines also depend on elbows, duct length and the make-up air available in your premises: to be adjusted according to your installation. Above 20 kW of cooking equipment, a 400°C/120 min smoke extraction system becomes mandatory, to be checked against the regulations applicable to your premises.
Installation and connection
This restaurant hood is supplied flat-packed for assembly, in 1 or 2 sections depending on length. The motor is supplied not fitted in the hood: extraction can be from the top or from the rear, depending on your duct configuration. The hood is positioned at 2 metres from the floor. Ducts and connection accessories are not supplied with this pack, see the "To be used with" section below.
Installation guide for 1 to 3 m hoods at télécharger ici
Points to check before ordering
- The hood length suited to the width of your cooking range (1 to 3 metres available).
- The planned duct diameter (250 to 400 mm depending on length), and its compatibility with your existing ductwork.
- The total cooking power of your cooking line: above 20 kW, 400°C/120 min extraction must be planned for.
- The desired extraction route, from the top or from the rear of the hood.
- Whether a more powerful motor (2600 or 3000 m³/h) is needed depending on the length chosen.
To be used with
For a tighter budget, also see our ECO compact hood pack, or for premises with wood-fired cooking our professional hood pack with wood-fire roof fan.
The PREMIUM hood is the equipment that keeps service running smoothly and gives your kitchen the look of a serious operation.