Commercial Rang Hood Rectangular, 1 to 6 m, with a 1-meter overhang

restaurant, rectangular central range hood, central range hood
Commercial Rang Hood Rectangular, 1 to 6 m, with a 1-meter overhang, vue 2
Video
restaurant, rectangular central range hood, central range hood
Commercial Rang Hood Rectangular, 1 to 6 m, with a 1-meter overhang, vue 2

The Commercial Rang Hood Rectangular, 1 to 6 m, with a 1-meter overhang, built in France, is available in lengths from 1 to 6 metres to contain smoke, grease and odours in commercial kitchens, as a wall-mounted or island hood.

  • Lengths available: 1 to 6 m (11 sizes, in 0.5 m increments)
  • Depth: 1000 mm
  • Height: 450 mm, front drop of 450 mm
  • Overhang: 1 m
  • Filtration: stainless steel baffle filters with blanking plates and stainless steel spacers
  • Manufacturing: France, 1-year warranty
Selected length
In stock
Quantity
649.00 Tax excluded
778,8 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The Commercial Rang Hood Rectangular, 1 to 6 m, with a 1-meter overhang captures smoke, grease and cooking vapours over a length of 1 to 6 metres, with a 1 m overhang suited to kitchens requiring a large catchment area. Built in France, it can be installed as a wall-mounted hood or as an island hood.

Technical specifications

Specification Value
Lengths available 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5 and 6 metres
Depth 1000 mm
Height 450 mm, front drop of 450 mm
Overhang 1 m
Filtration Stainless steel baffle filters, blanking plates and stainless steel spacers
Grease tray With drain plug
Manufacturing France
Warranty 1 year
Product weight From 45 kg, varies according to the length chosen
Package weight 90 kg

Static extraction hood without motor: use and assembly

This rectangular hood is a static hood, supplied without a motor: it captures and contains air laden with grease and smoke, but requires a double-inlet centrifugal fan, an extraction fan box or a roof extract fan to provide extraction. It is available as a wall-mounted version, fitted against a wall, or as an island version above a cooking suite. The air outlet hole is not pre-drilled at the factory: it is to be made on top, at the rear or on one side of the hood, depending on the type of fan chosen. If the fan is built into the hood (up to 3 m in length), its position and that of the outlet should ideally be centred.

Filters and outlet diameter according to length

The number of baffle filters and the outlet diameter required depend directly on the hood length chosen, as a guide only and depending on the extraction ductwork installed:

  • 1 m hood: 1.5 baffle filters, outlet to be drilled at D200 or D250 mm
  • 1.5 and 2 m hood: 2 baffle filters and blanking plates, outlet to be drilled at D250 or D315 mm
  • 2.5 m hood: 3 baffle filters and blanking plates, outlet to be drilled at D315 or D355 mm
  • 3 m hood: 4 baffle filters and blanking plates, outlet to be drilled at D355 or D400 mm

Beyond 3 m, the hood is supplied in 2 modules assembled on site: for example, the 4 m length corresponds to two 2 m modules, and the 6 m length to two 3 m modules. A junction hole between the two modules must be made during assembly. The exact composition of the modules according to the length ordered depends on stock availability at the time of order.

Installation and connection

The hood is supplied flat-packed in cardboard, in 1 or 2 modules depending on the length, ready to assemble. Assembly instructions are available for download. VentilSoGood supplies the equipment without carrying out installation: assembly and connection to the extraction ductwork must be carried out by a professional.

Points to check before ordering

  • Hood length required according to the size of the cooking line to be covered (1 to 6 m available)
  • Desired location for the outlet hole (top, rear or side), which determines the choice of fan and its wiring
  • Outlet diameter to be drilled, according to the filter and length chosen (D200 to D400 mm, see table above)
  • Compatibility with a built-in double-inlet centrifugal fan (3 m hood maximum) or a remote fan in an extraction fan box/roof extract fan for longer lengths
  • Site access for receiving a pallet weighing up to 90 kg and assembly in 1 or 2 modules

To go with

Also discover our rectangular hood with a 1.2 m overhang, our special oven hood with a large overhang or our condensation hood for laundries.

Product Details

Ventilsogood
hotterectangul
Selected length
Available Length
4 meters
Available Length
4.5 meters
Available Length
5 meters
Available Length
5.5 meters
Available Length
6 meters
Available Length
1 meter
Available Length
1.5 meters
Available Length
2 meters
Available Length
2.5 meters
Available Length
3 meters
Available Length
3.5 meters
Manufacturing
Made in France
Warranty
1 year
Package weight
90 kg
0657968467002

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What is the difference between this rectangular hood and a hood with a built-in motor?

This rectangular hood is a static hood, sold without a motor. It captures and contains smoke and grease, but air extraction requires a double-inlet centrifugal fan, an extraction fan box or a roof extract fan, chosen separately according to the hood length and the ductwork installed.

Can the fan be installed directly in this hood?

Yes, for lengths up to 3 m, a double-inlet centrifugal fan can be built into the hood. Its position and that of the outlet hole must then be centred. Beyond 3 m, it is preferable to use a remote fan in an extraction fan box or a roof extract fan.

What outlet diameter should be used depending on the hood length?

The diameter depends on the length ordered: D200 or D250 mm for 1 m, D250 or D315 mm for 1.5 and 2 m, D315 or D355 mm for 2.5 m, D355 or D400 mm for 3 m. Beyond that, the hood is made up of two modules with a junction to be created between them.

Is the hood supplied assembled or as a kit?

The rectangular hood is supplied flat-packed in cardboard, in 1 or 2 modules depending on the length chosen, ready to assemble. Assembly instructions are available for download on the product page. Assembly and connection to the extraction ductwork must be carried out by a professional.

Should you choose a wall-mounted hood or an island hood?

This rectangular hood can be installed either as a wall-mounted version, against a wall, or as an island version above a cooking suite. The choice depends on the layout of your cooking equipment and the access required around the capture area.