Commercial Rang Hood Pro, with a compensation range of 2 to 6 m

Stainless-steel compensation hood for professional commercial kitchens
Commercial Rang Hood Pro, with a compensation range of 2 to 6 m, vue 2
Saftair Alvene Vim France Air Air-Compensated Range Hood
diagram of an induction condensation range hood
Commercial Rang Hood Pro, with a compensation range of 2 to 6 m, vue 5
Stainless-steel compensation hood for professional commercial kitchens
Commercial Rang Hood Pro, with a compensation range of 2 to 6 m, vue 2
Saftair Alvene Vim France Air Air-Compensated Range Hood
diagram of an induction condensation range hood
Commercial Rang Hood Pro, with a compensation range of 2 to 6 m, vue 5

The Commercial Rang Hood Pro, with a compensation range of 2 to 6 m, incorporates a supply air plenum in its canopy to reintroduce fresh air directly above the cooking zone: a solution designed for large kitchens and high cooking loads.

  • Lengths available: 2 to 6 m (other dimensions available on request, please contact us)
  • Depth: 1200 mm, height 400 mm, drop 400 mm
  • Insulated compensation plenum to prevent condensation
  • Stainless steel baffle filters and blanking plates
  • Supplied assembled in 1 section (2 sections above 3 m)
Selected length
Available in 5–10 working days - Contact Us
Quantity
2,176.00 Tax excluded
2611,2 € TTC
Available in 5–10 working days - Contact Us

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

Commercial extraction hood with integrated air compensation

The Commercial Rang Hood Pro, with a compensation range of 2 to 6 m, is a motorless hood that combines fume extraction with fresh air supply directly into the cooking zone, thanks to a supply air plenum built into its canopy. It is designed for high-output kitchens or long cooking lines, where a standard extraction hood is no longer enough to compensate for the extracted air.

A dual-action hood

On one side, the hood captures fumes, grease and steam at source through its stainless steel baffle filters. On the other, it supplies fresh air via its compensation plenum, which limits negative pressure in the kitchen, unpleasant cold draughts and slamming doors. This is the very principle of air compensation: you cannot remove stale air without replacing it, or the whole room becomes unbalanced. An induction-type variant is available on request, which distributes air differently: speak to our team if your setup requires it.

Technical specifications

Specification Value
Lengths available 2000, 2500, 3000, 3500, 4000, 4500, 5000, 5500 and 6000 mm
Depth 1200 mm
Height 400 mm
Drop 400 mm
Weight 90 kg
Material Stainless steel
Compensation plenum Insulated (anti-condensation)
Filtration Stainless steel baffle filters and blanking plates
Grease tray With drain plug
Delivery Assembled in 1 section, in 2 sections above 3 m
Warranty 1 year

Number of filters by length

  • 2000 mm: 2 filters + 2 blanking plates
  • 2500 mm: 3 filters + 2 blanking plates
  • 3000 mm: 3 filters + 3 blanking plates
  • 3500 mm: 4 filters + 3 blanking plates
  • 4000 mm: 4 filters + 4 blanking plates
  • 4500 mm: 5 filters + 4 blanking plates
  • 5000 mm: 5 filters + 5 blanking plates
  • 5500 mm: 6 filters + 5 blanking plates
  • 6000 mm: 6 filters + 6 blanking plates

Additional filters can be added as an option.

Installation and connection

This hood is supplied without a motor: it connects to a remote motor, an extraction fan box or an existing roof extract fan on the extraction side, and to a fresh air handling unit or a supply air fan box on the compensation side. Up to 3 m, it is supplied assembled as a single unit; beyond that, it arrives in 2 sections to be assembled on site. Installation and electrical connections must be carried out by a qualified professional.

Points to check before ordering

  • The hood length suited to your cooking line: count the total length of the appliances, not just their number.
  • The extraction and compensation airflow required for your installation: these figures depend on the ductwork, cooking load and pressure losses, and should be confirmed with your motor and fan box.
  • Compatibility with your existing remote motor, fan box or roof extract fan (duct diameter, airflow).
  • The available clearance in height and depth (1200 mm) before installation.
  • Whether or not you need integrated lighting, available as an option.

Pair with

Also discover our range of motorless extraction hoods, including our rectangular extraction hood, our island extraction hood and our condensation hood for dishwashing areas.

Recommended similar product: also take a look at our oven hood with extra-large canopy, for intensive cooking zones requiring enhanced containment.

Product Details

Ventilsogood
hottcompensalpha
Selected length
Available Length
2 meters
Available Length
2.5 meters
Available Length
3 meters
Available Length
3.5 meters
Available Length
4 meters
Available Length
4.5 meters
Available Length
5 meters
Available Length
5.5 meters
Available Length
6 meters
Manufacturing
Made in France
Warranty
1 year
Package weight
90 kg
0657968930179

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What is the difference between a standard extraction hood and this hood with air compensation?

A standard extraction hood only extracts fumes. The Commercial Rang Hood Pro also reintroduces fresh air via a supply air plenum built into the canopy, which limits negative pressure and cold draughts in the kitchen, a real benefit on long or high-output cooking lines.

What hood length should I choose for my cooking line?

This compensation hood is available from 2000 to 6000 mm in 500 mm increments. The choice depends on the total length of your cooking appliances and the space available. For an unusual layout, speak to our team before ordering.

Is this hood compatible with my existing remote motor or roof extract fan?

Yes, this hood is supplied without a motor and connects on the extraction side to a remote motor, an extraction fan box or a roof extract fan, and on the compensation side to a fresh air handling unit or a supply air fan box. Check the duct diameter and airflow of your current installation before ordering.

How is a long hood delivered?

Up to 3 m, the hood is supplied assembled as a single unit. Beyond 3 m, it is delivered in 2 sections to be assembled on site, making transport and handling of long units easier.

What is the difference between a compensation hood and an induction hood?

The compensation hood supplies fresh air through a plenum built into the canopy. An induction-type variant, which distributes air differently, is available on request for this hood: contact our team to find out which option best suits your kitchen layout.