Condensation hood for commercial laundry rooms
The condensation hood for laundry is a professional hood without motor, designed to deal with the steam and humidity produced by dishwashers, sinks and intensive washing areas. Available from 1 to 6 metres, it suits a small laundry room as well as a full dishwashing line.
How it works
Unlike a standard cooking hood, this condensation hood does more than simply capture warm air: it condenses the water vapour using stainless steel condensation filters that cool and separate the moisture. The collected water drains away with the air flow, which limits steam spreading in the room. A grease tray with drain plug makes cleaning the whole unit easier.
Technical specifications
| Specification |
Value |
| Available length |
from 1000 mm to 6000 mm (500 mm increments) |
| Depth |
1000 mm |
| Height |
450 mm |
| Drop |
450 mm |
| Package weight |
90 kg |
| Material |
stainless steel, stainless steel condensation filters |
| Warranty |
1 year |
Number of filters and outlet hole size according to length
The diameter of the outlet hole (not pre-cut, to be made above, behind or on one side of the hood depending on the type of motor used) and the number of filters vary with the length of the hood:
- L 1000 mm: 1 filter + 2 x 1/2 blanking plate, D 250 mm outlet
- L 1500, L 2000 mm: 2 filters + blanking plates, D 315 or D 355 mm outlet
- L 2500 mm: 3 filters + 2 blanking plates, D 315 or D 355 mm outlet
- L 3000 mm: 4 filters + 2 blanking plates, D 355 or D 400 mm outlet
- L 3500 mm: 2 modules of L 2500 + L 1000 mm, or L 2000 + L 1500 depending on stock
- L 4000 mm: 2 modules of L 2000 + L 2000 mm
- L 4500 mm: 2 modules of L 2500 + L 2000 mm, or L 3000 + L 1500 depending on stock
- L 5000 mm: 2 modules of L 2500 + L 2500 mm, or L 3000 + L 2000 depending on stock
- L 5500 mm: 2 modules of L 2500 + L 3000 mm
- L 6000 mm: 2 modules of L 3000 + L 3000 mm
If the motor is built into the hood (only possible up to 3 m), its position and that of the outlet should ideally be at the centre of the hood.
Delivery and assembly
The condensation hood for laundry is delivered flat-packed, ready to assemble. Beyond 2.5 or 3 m, it arrives as 2 independent modules to be assembled on site. Additional condensation filters can be added as an option.
Installation instructions
à télécharger ici
Points to check before ordering
- The hood length suited to your washing machine, sink or washing line: it is generally chosen slightly wider than the equipment to be covered.
- The outlet diameter required according to the chosen length (from D 250 mm for 1 m up to D 400 mm for 3 m): an undersized diameter increases pressure losses and noise.
- The position of the outlet hole (top, rear or side) depending on the type of motor planned, bearing in mind that a built-in motor is only possible up to 3 m.
- The fan is not included: to be sourced separately according to the airflow required for your installation.
- The space and access needed for assembling the modules beyond 2.5 to 3 m.
To go with it
Also discover our range of hoods without motor, including our central hood, our make-up air hood and our stainless steel rectangular hood, designed to meet all commercial extraction needs.
Recommended complementary product: for cooking areas, see our oven hood with extra-large canopy, designed for maximum extraction.