Commercial Rang Hood pro stainless steel Classic, 1 to 6 m, with cap

Stainless steel range hood for professional restaurant kitchens with a fast-food-style canopy
Dimensions of a professional stainless steel restaurant range hood with a fast-food-style visor
restaurant range hood
snack hood
Dimensions of a Classic Stainless Steel Range Hood for Professional Kitchens
Video
Stainless steel range hood for professional restaurant kitchens with a fast-food-style canopy
Dimensions of a professional stainless steel restaurant range hood with a fast-food-style visor
restaurant range hood
snack hood
Dimensions of a Classic Stainless Steel Range Hood for Professional Kitchens

The Commercial Rang Hood pro stainless steel Classic covers 1 to 6 metres with its bevelled cap which improves the containment of smoke, grease and odours: the most versatile model in the range for fitting out any commercial kitchen.

  • Lengths available: 1 to 6 m (in 0.5 m increments)
  • Height: 450/300 mm, projection: 1000 mm
  • Stainless steel baffle filters 500 x 400 mm supplied
  • Compatible with 7/7, 7/9, 8/9 fan motors, 1500 to 3000 m³/h
  • Package weight: 60-220 kg depending on model
Selected length
In stock
Quantity
549.00 Tax excluded
658,8 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The Commercial Rang Hood pro stainless steel Classic is a commercial extraction hood without motor in stainless steel, available in lengths from 1 to 6 metres, fitted with a bevelled cap for better containment of smoke, grease and odours in a commercial kitchen.

A versatile stainless steel hood for all commercial kitchens

A genuine best seller among restaurants, fast food outlets, catering kitchens and pub kitchens, this bare hood without motor fits most kitchen layouts. Thanks to its 1000 mm projection and bevelled cut, it covers a wide range of cooking requirements, including in premises with reduced ceiling height. It then connects to a double-inlet centrifugal fan or a remote extraction fan box, sold separately. Its commercial grade stainless steel construction and 1 year warranty make it a durable choice for intensive use.

Technical specifications

Specification Value
Lengths available 1000 to 6000 mm (1 to 6 m)
Height 450 or 300 mm
Projection (depth) 1000 mm
Stainless steel baffle filters 500 x 400 mm, 25 mm thick
Package weight 60 kg
Compatible motors 7/7, 7/9, 8/9, from 1500 m³/h to 3000 m³/h
Incompatible motors 9/9, 10/10, 12/12 (3400, 3600, 4000 and 6000 m³/h)
Optional accessory LED lighting
Warranty 1 year but service life of over 20 years!

What outlet diameter is needed depending on hood length?

The outlet diameter required depends directly on the chosen hood length and the number of filters fitted:

  • 1000 mm hood: 1 baffle filter + 2 half filters, outlet of D 200 or D 250 mm
  • 1500 and 2000 mm hood: 2 baffle filters + blanking plates, outlet of D 250 or D 315 mm
  • 2500 mm hood: 3 baffle filters + blanking plates, outlet of D 315 or D 355 mm
  • 3000, 3500 and 4000 mm hood: 4 baffle filters + blanking plates, ductwork in D 355 or D 400 mm (2 outlets required, please contact us)
  • 4500 mm hood: 5 baffle filters + blanking plates, ductwork in D 400 mm (2 outlets required, please contact us)
  • 5000 mm hood: 6 baffle filters + blanking plates, ductwork in D 400 or D 450 mm (2 outlets required, please contact us)
  • 5500 mm hood: 7 baffle filters + blanking plates, ductwork in D 400 mm (2 outlets required, please contact us)
  • 6000 mm hood: 8 baffle filters + blanking plates, ductwork in D 450 mm (2 outlets required, please contact us)

From 3 m or 3.5 m upwards, the hood is delivered in 2 sections: an assembly kit is available as an option, but it is not essential.

Installation and connection

The hood is delivered flat packed, well protected, ready to assemble. Ducts and connection accessories are not included: you'll find these in our accessories category. Installation instructions are provided to guide you through assembly.

télécharger ici

LED lighting can be added as an option, see our Accessories category.

Points to check before ordering

  • The hood length must cover the width of your cooking line: measure your appliances before choosing the length.
  • The compatible motor depends on the length: make sure your choice stays within the 7/7, 7/9, 8/9 range (1500 to 3000 m³/h), as 9/9, 10/10 and 12/12 motors are not compatible with this hood.
  • The outlet diameter to be fitted varies depending on the length chosen (from D 200/250 mm to D 450 mm): refer to the table above.
  • For lengths from 3 m upwards, two outlets are required on the ductwork: plan for this in your installation.
  • This hood is designed for an enclosed kitchen or cooking loads below 20 kW: above this, please contact us for a suitable solution.

Frequently bought together

Also discover our oven hood, our make-up air hood as well as our condensation hood for wash-up areas.

Product Details

Ventilsogood
Hclas1a6m
Selected length
Available Length
1 meter
Available Length
1.5 meters
Available Length
2 meters
Available Length
2.5 meters
Available Length
3 meters
Available Length
3.5 meters
Available Length
4 meters
Available Length
4.5 meters
Available Length
5 meters
Available Length
5.5 meters
Available Length
6 meters
Manufacturing
Made in France
Warranty
1 year
Package weight
60 kg
0657968031012

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What hood length should I choose for my cooking line?

The Commercial Rang Hood pro stainless steel Classic is available from 1 to 6 metres. You should choose a length that covers the full width of your cooking line (ranges, fryers, griddles). Measure the total width of your appliances before selecting the length, to ensure good containment of smoke and grease.

Which motor should I choose to run this hood?

This hood is compatible with double-inlet centrifugal fans of size 7/7, 7/9 and 8/9, for an airflow of 1500 to 3000 m³/h. Motors 9/9, 10/10 and 12/12 (3400 to 6000 m³/h) are not compatible with this hood model.

What outlet diameter should I plan for on the ductwork?

The diameter depends on the hood length chosen: from D 200 or D 250 mm for a 1000 mm hood, up to D 450 mm for a 6000 mm hood. From 3 metres upwards, two outlets are required on the ductwork; please contact us for precise sizing.

Is the hood supplied with filters?

Yes, the Commercial Rang Hood pro stainless steel Classic is supplied with its stainless steel baffle filters measuring 500 x 400 mm, along with the blanking plates corresponding to its length. Ducts and connection accessories, however, are not included.

Can lighting be added to this hood?

Yes, LED lighting can be added to this Commercial Rang Hood pro stainless steel Classic. This accessory is available separately in our Accessories category, as a complement to the hood.