The Commercial Rang Hood Inox Pro Ultra-Compact is a static stainless steel commercial extraction hood, designed for kitchens where space is tight: low ceilings, food trucks, containers or small restaurants. With only 55 cm of depth, it fits where a standard hood simply would not.
A static extraction hood built for small spaces
This compact stainless steel commercial extraction hood is a static hood, meaning it has no built in fan: it captures smoke, grease and cooking vapours, but needs a double-inlet centrifugal fan, an extraction fan box or a roof extract fan connected to the outlet to ensure proper extraction. Its stainless steel construction resists heat and corrosion well, for a durable hood that holds up in restaurant, fast food, kebab shop, snack bar, creperie or food truck kitchens.
The system is modular: the number of stainless steel baffle filters and blanking plates adapts to the length chosen, from 1 to 2.5 metres. Maintenance stays simple, a real plus for day to day hygiene in a commercial kitchen.
Technical specifications
| Specification |
Value |
| Lengths available |
1000 mm, 1500 mm (1500 L), 2000 mm (L2000), 2500 mm |
| Height |
450 mm |
| Depth |
500 mm (55 cm) |
| Weight |
23 to 52 kg depending on length |
| Parcel weight |
40 kg |
| Stainless steel baffle filters |
L 500 x D 25 x H 400 mm |
| Compatible motorisation |
Double-inlet centrifugal fan 7/7, 7/9, 8/9, from 1500 m³/h to 3000 m³/h |
| Warranty |
1 year |
Filters and outlet according to the length chosen
The number of filters and the outlet diameter to cut depend on the length of your compact stainless steel commercial extraction hood:
- Stainless steel hood L 1000 mm: 1 baffle filter + 2 half plates, outlet to be cut in D200 or D250 mm
- Stainless steel hood L 1500 and L2000 mm: 2 baffle filters + blanking plates, outlet to be cut in D250 or D315 mm
- Stainless steel hood L 2500 mm: 3 baffle filters + blanking plates, outlet to be cut in D355 or D315 mm
Ducts and connection accessories are not supplied with the hood: find them in the "Pairs well with" section below.
Points to check before ordering
- The hood length suited to your cooking line (1 to 2.5 m)
- The fan planned: a double-inlet centrifugal fan 7/7, 7/9 or 8/9 is compatible, a remote extraction fan box or a roof extract fan reduce noise in the dining area
- The outlet diameter to cut according to the length chosen (D200 to D355 mm)
- The available ceiling height: this hood is specifically designed for low ceilings
- The required airflow based on your cooking power, to confirm against your dimensions and duct network
Pairs well with
For a complete turnkey solution, also check out our packs including hood, fan and speed controller: Pack 400° Hood 1.5 to 4 m + roof extract fan + speed controller or Pack F400/120 Hood 2.5 to 3 m + double-inlet centrifugal fan + 220 V speed controller.
Installation guide at télécharger ici
Warranty: 1 year.