Commercial Rang Hood Special oven, 1–6 m, with a large 1.2 m hood
The special oven extraction hood with a large 1.2 m canopy effectively captures smoke and heat above a pizza oven or range cooker, available from 1 to 6 metres in length.
- Canopy depth: 1,200 mm
- Height: 450 mm (300 mm at the canopy edge)
- Length: from 1,000 to 6,000 mm
- Manufacture: France
- Filters: stainless steel baffle filter L 500 x H 400 mm
Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
The special oven extraction hood is a commercial extraction hood without motor, designed with a large 1.2 m canopy to capture smoke and heat above a pizza oven, a traditional oven or a range cooker, in lengths from 1 to 6 metres.
A large canopy designed for oven heat
Unlike a standard commercial kitchen hood, mainly designed for greasy fumes, this special oven extraction hood features a 1.2 m canopy depth, significantly larger than a standard 1 m canopy. This extra depth captures hot air flows right at their source, directly above the oven hearth or door, and limits their spread into the room. A real advantage when the heat given off by the appliance adds to the cooking fumes.
Technical specifications
| Specification | Value |
|---|---|
| Length | 1,000, 1,500, 2,000, 2,500 to 6,000 mm |
| Height | 450 mm (300 mm at the canopy edge) |
| Canopy depth | 1,200 mm |
| Filters | Stainless steel baffle filter, L 500 x H 400 mm, with blanking plates |
| Manufacture | France |
| Warranty | 1 year |
| Package weight | 60 kg |
Number of filters and outlet size by length
The number of baffle filters and the diameter of the outlet to be drilled vary according to the hood length chosen:
- L 1000 mm: 1 baffle filter + 2 half filters, outlet to allow for D 200 or D 250 mm
- L 1500 and L 2000 mm: 2 baffle filters + blanking plates, outlet D 250 or D 315 mm
- L 2500 mm: 3 baffle filters + blanking plates, outlet D 315 or D 355 mm
- L 3000 to L 4000 mm: 4 baffle filters + blanking plates, please contact us for ductwork sizing
- L 4500 mm: 5 baffle filters + blanking plates, please contact us for ductwork
- L 5000 mm: 6 baffle filters + blanking plates, please contact us for ductwork
- L 5500 mm: 7 baffle filters + blanking plates, please contact us for ductwork
- L 6000 mm: 8 baffle filters + blanking plates, please contact us for ductwork
Installation and connection
The hood is delivered flat packed, well protected, ready to assemble in 1 or 2 sections depending on length. Ducts and connection accessories are not included: you'll find these in our accessories category. An installation guide is available to download here. Electrical connections, particularly for an added fan or lighting, must be carried out by a qualified professional.
This hood without motor can optionally accept a double-inlet centrifugal fan compatible with 7/7, 7/9 or 8/9 sizes, for an airflow of 1,500 to 3,000 m³/h, suited to an enclosed kitchen or cooking output below 20 kW (see our fan category). A speed controller can also be added for the fan and/or lighting.
Points to check before ordering
- The length of the oven or cooking line, to choose a hood that covers its full width
- The outlet diameter to be drilled, which varies according to the hood length chosen (see table above)
- The number of baffle filters required and the headroom available below ceiling level
- If a fan is planned: the compatibility of the double-inlet centrifugal fan (7/7, 7/9, 8/9) with the cooking output
- Sufficient fresh air supply in the room, to avoid negative pressure and loss of extraction airflow
To pair with
- Sealed LED strip light, to light up the cooking area
- Base 4.5 A speed controller for double-inlet centrifugal fan 7/7, 7/9, 8/9, to adjust fan or lighting speed
Also discover our range of hoods without motor, including our rectangular hood and our make-up air hood.
Product Details
- Selected length
- Available Length
- 1 meter
- Available Length
- 1.5 meters
- Available Length
- 2 meters
- Manufacturing
- Made in France
- Warranty
- 1 year
- Package weight
- 60 kg
You might also like
8 other products in the same category:
Customers who bought this product also bought:
Frequently asked questions
What's the difference between this special oven hood and a standard hood?
The special oven hood stands out thanks to its 1.2 m canopy, deeper than a standard 1 m canopy. This extra depth captures the heat given off by a pizza oven or range cooker more effectively, in addition to cooking fumes, limiting their spread into the kitchen.
What hood length should I choose for my oven?
The hood is available from 1 to 6 metres in 50 cm increments. Choose a length that fully covers the width of the oven or cooking line to be captured, otherwise some of the smoke and heat may not be properly extracted.
Does this hood come with a fan?
No, this hood is sold without a motor. It can optionally accept a double-inlet centrifugal fan compatible with 7/7, 7/9 or 8/9 sizes, for an airflow of 1,500 to 3,000 m³/h, suited to an enclosed kitchen or cooking output below 20 kW. The fan is selected separately from our dedicated category.
Are the extraction ducts supplied with the hood?
No, ducts and connection accessories are not supplied with this hood. The outlet diameter to be drilled depends on the length chosen, from D 200/250 mm for 1 metre up to D 315/355 mm for 2.5 metres. These items are available in our accessories category.
Who can install this hood?
The hood is delivered flat packed and ready to assemble in 1 or 2 sections, with an installation guide supplied. If a fan or lighting is added, the electrical connections must be carried out by a qualified professional for the warranty to remain valid.