Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware

Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware
Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware, vue 2
Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware, vue 3
Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware
Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware, vue 2
Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware, vue 3

Fix your commercial kitchen hood or extraction fan box securely and permanently to concrete, plasterboard, brick or timber, with this complete kit of 8 x D8 mm threaded rods and matching fixings.

  • Rod diameter: D8 mm
  • Threaded rod length: 1000 mm
  • Dual-thread screws: L120 mm (timber, concrete, brick, breeze block, with suitable wall plug)
  • Extended connecting nuts: L20 mm
  • Made in: France
In stock
Quantity
48.00 Tax excluded
57,6 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

Installation kit for commercial kitchen hoods and extraction fan boxes

The Commercial Rang Hood Installation Kit: Cabinet-Threaded rods and hardware is a complete D8 mm fixing set of threaded rods and hardware, designed to hang and securely anchor a stainless steel commercial kitchen hood or an extraction fan box to the ceiling and wall. Straightforward to install, it suits most commercial kitchen mounting surfaces.

Technical specifications

Specification Value
Kit contents 8 x D8 mm nuts, 8 x L20 mm extended nuts, 8 x L120 mm dual-thread screws, 8 x L1000 mm D8 mm threaded rods
Diameter D8 mm
Threaded rod length 1000 mm
Dual-thread screw length 120 mm
Weight 1 kg
Made in France

Use and compatibility

This kit is used to fix a hood or motorised extraction fan box to the ceiling using the threaded rods, and to a wall using the dual-thread screws. The extended nuts allow two threaded sections to be joined together, for example to extend a rod according to ceiling height. It is suitable for both commercial kitchen hoods and motorised extraction fan boxes, and can also be used to fix duct clips onto your ventilation ductwork.

The D8 mm diameter of this kit is designed for standard hood or extraction box suspension. For mounting a double-inlet centrifugal fan inside the extraction box (vibration management), use a fan mounting frame instead: this installation kit is not designed for that purpose.

Installation and connection

The dual-thread screws are fixed on one side into the ceiling (timber, concrete, brick, breeze block, with a wall plug suited to the surface) and on the other side receive the threaded rod, or the hood directly via a nut. For wall mounting, the same dual-thread screw fixes into the wall. The extended nuts allow two threaded rods to be joined end to end if ceiling height requires it. Drilling and wall plug selection must be adapted to the actual surface in your kitchen: taking measurements before ordering avoids any unpleasant surprises.

Points to check before ordering

  • Drilling diameter compatible with D8 mm rods on your surface (concrete, plasterboard, brick, timber)
  • Type of ceiling and wall: a suitable wall plug is required, not supplied with this kit
  • Actual ceiling height, to determine whether an extended nut connector will be needed between two rods
  • Number of kits required depending on the length of your hood or extraction box: to be determined according to your installation, as this kit covers 8 fixing points
  • Weight of the hood or extraction box to be suspended, to confirm the number of fixing points required

Goes well with

Product Details

Ventilsogood
kitfixhotte
Products
Mounting Kit
Manufacturing
Made in France
0657968563353

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What is the difference between this hood installation kit and a motor fixing kit?

This installation kit is used to hang and secure the hood or extraction fan box to the ceiling and wall, using D8 mm threaded rods and dual-thread screws. A motor fixing kit, such as our fan mounting frame, serves a different purpose: holding the fan in place inside the extraction box while managing vibrations. The two are not interchangeable.

Is this kit compatible with all types of walls and ceilings?

The dual-thread screws supplied are suitable for timber, concrete, brick, breeze block and similar surfaces, provided a wall plug suited to each surface is used. This wall plug is not supplied with the kit and should be chosen according to the exact nature of your wall or ceiling.

Can the kit also be used to fix duct clips?

Yes, the dual-thread screws and D8 mm threaded rods in this kit can also be used to fix duct clips onto your ventilation ductwork, in addition to securing the hood or extraction box.

What exactly is included in the hood and extraction box installation kit?

The kit includes 8 x D8 mm nuts, 8 x 20 mm extended nuts for joining two threaded sections, 8 x 120 mm dual-thread screws (D8 mm thread on one side, wood or concrete screw on the other) and 8 x 1000 mm D8 mm threaded rods. Enough to equip 8 fixing points.

How many kits are needed for a hood several metres long?

This depends on the length of your hood or extraction box and the number of fixing points you want to distribute: a single kit provides 8 complete fixing points (rod, screw and nuts). For a long hood, several kits may be needed depending on your installation.