Mounting Frame for a Worm Gear Motor

frame / mounting brackets for cabinet motor
frame / mounting brackets for cabinet motor
Mounting Frame for a Worm Gear Motor, vue 3
frame / mounting brackets for cabinet motor
frame / mounting brackets for cabinet motor
Mounting Frame for a Worm Gear Motor, vue 3

The mounting frame for a worm gear motor securely fixes your centrifugal motor inside a hood, an extraction fan box or a mechanical ventilation system, with a flange of approximately 25 mm and a choice of 6 internal dimensions depending on your model.

  • Flange: approximately 25 mm
  • Available dimensions: from 200 x 230 mm (7/7) to 350 x 390 mm (12/12)
  • Manufactured: Europe
  • Weight: 0.9 kg
  • Compatibility: 7/7, 7/9, 9/7, 9/9, 10/10, 12/12 motors
  • Several internal dimensions for the different motor models:

    ~ 200 X 230: 7/7 19/19 181/181
    ~ 200 X 300: 7/9 19/25 181/241
    ~ 300 X 200: 9/7 25/19 241/181
    ~ 260 X 300: 9/9 25/25 241/241
    ~ 290 X 330: 10/10 28/28 270/270
    ~ 350 X 390: 12/12 33/33 321/321

Engine
In stock
Quantity
15.00 Tax excluded
18 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The mounting frame for a worm gear motor is a support bracket that fixes your centrifugal motor inside an extraction fan box, a commercial kitchen hood or a professional mechanical ventilation system, with a flange of approximately 25 mm and a choice of internal dimensions depending on the size of your motor.

What is the mounting frame for a worm gear motor used for

This frame, also known as a support bracket, acts as the fixing point between the worm gear motor and the structure that houses it: the wall of a fan box, the ceiling of a hood or a ventilation duct. The flange of approximately 25 mm bears on the perimeter of the motor and spreads the fixing load, so the motor stays firmly in place even during peak service, when vibrations build up. This is a different part from worm gear motor support feet, which sit the motor on the floor or on a frame rather than enclosing it: the right choice depends on your mounting configuration.

Technical specifications

Specification Value
Product Mounting fixture (frame / support bracket)
Flange approximately 25 mm
Manufactured Europe
Weight 0.9 kg
Package weight 1 kg

Internal dimensions available by motor size

Specification Value
7/7, 19/19, 181/181 200 x 230 mm
7/9, 19/25, 181/241 200 x 300 mm
9/7, 25/19, 241/181 300 x 200 mm
9/9, 25/25, 241/241 260 x 300 mm
10/10, 28/28, 270/270 290 x 330 mm
12/12, 33/33, 321/321 350 x 390 mm

Installation and connection

The frame is fixed to the wall of the fan box, hood or duct, and the worm gear motor is then positioned in the internal opening matching its size. Remember to fit a sealing gasket between the motor and the frame to limit vibration and minor air leaks: this is the natural complement to this type of fixture. Fitting the frame is within reach of a professional or a competent DIY installer, but the electrical connection of the motor must always be carried out by a qualified professional, a condition required to keep the warranty valid.

Points to check before ordering

  • Check the exact size of your worm gear motor (7/7, 7/9, 9/7, 9/9, 10/10 or 12/12) to choose the correct internal dimension of the frame.
  • Make sure you need a frame that encloses the motor, rather than support feet that sit it on the floor.
  • Check the space available in your fan box, hood or duct for the frame and its 25 mm flange.
  • Plan for an additional sealing gasket if your installation requires it, as this frame does not come with a gasket as standard.

Goes well with

Product Details

Ventilsogood
bridmot
Engine
Products
Fastening
Manufacturing
Made in Europe
Package weight
1 kg
0657968777804

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What is the difference between a mounting frame and support feet for a worm gear motor?

The mounting frame encloses the worm gear motor and holds it against a wall, fan box or hood thanks to its flange of approximately 25 mm. Support feet, on the other hand, sit the motor on the floor or on a frame. The choice depends on your configuration: wall mounting with the frame, or floor mounting with feet.

Which frame size should I choose for my worm gear motor?

The internal dimension of the frame depends on the size of your motor: 200x230 mm for a 7/7, 200x300 mm for a 7/9, 300x200 mm for a 9/7, 260x300 mm for a 9/9, 290x330 mm for a 10/10 and 350x390 mm for a 12/12. Check the exact size marked on your motor before ordering.

Do I need a sealing gasket in addition to the mounting frame?

This mounting frame does not come with a gasket as standard. For an airtight, lower vibration installation, it is recommended to add a gasket between the motor and the frame, available in particular in the motor fitting kit (gasket + fixings).

Is the frame supplied with the worm gear motor or sold separately?

This mounting frame is a part sold separately, designed in particular to replace a damaged frame or to fit a worm gear motor bought on its own. Check your current configuration before ordering it as an addition.