400° Package: 1.5–4 m Canopy + Roof Turret + Electronic variable speed drive
- On sale!
The 400° Package: Canopy + Roof Turret + Speed Controller brings together in one complete set a 1.5 to 4 metre stainless steel commercial kitchen hood, a roof turret with horizontal discharge and a speed controller with emergency stop button, to equip a commercial kitchen subject to the F400/120 smoke extraction standard.
- Hood length: 1.5 to 4 metres
- Roof turret airflow: up to 2700 m³/h (1.5 to 2.5 m hoods) or 4200 m³/h (3 to 4 m hoods)
- Power supply: 230 V single-phase or 380 V three-phase
- IP55 speed controller with smoke extraction emergency stop button and gas safety connection
- Stainless steel baffle filters included
Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
The 400° Package: Canopy + Roof Turret + Speed Controller is a complete set for commercial kitchens, designed for premises subject to smoke extraction regulations. It combines a static stainless steel hood from 1.5 to 4 metres, a roof turret with horizontal discharge and a fan speed controller with emergency stop button, to equip an open kitchen with more than 20 kW of cooking power or an enclosed kitchen that does not meet standard requirements (non fire-rated walls, serving hatch).
Professional stainless steel kitchen hood, the heart of your kitchen
The Ventilsogood static hood, available from 1.5 to 4 metres, captures smoke, grease and odours above your cooking stations. It is supplied with stainless steel baffle filters and drain screws, and its 300 mm front valance optimises capture. Its modular system allows you to adjust the number of filters and blanking plates according to your kitchen layout. Robust, heat and corrosion resistant, it is easy to clean daily, a real advantage when it comes to keeping up during service. An LED light can be added as an option.
Roof turret: extraction relocated to your roof
The roof turret with horizontal discharge takes over extraction directly on the roof, away from the kitchen. Unlike a double-inlet centrifugal fan housed inside the hood, it moves the motor noise outside the room, a feature appreciated in open kitchens. It includes a bird guard mesh. Three motor sizes are fitted to this package depending on the hood length chosen: the T32 (250 W, up to 2000 m³/h) and the T36 (250 W, up to 2750 m³/h) for hoods from 1.5 to 2.5 metres, and the T40 (370 W, up to 4200 m³/h) for hoods from 3 to 4 metres.
Speed controller with smoke extraction emergency stop button
The speed controller supplied with this package drives the roof turret motor and includes an emergency stop button for forced smoke extraction mode, as well as a gas safety connection, with an IP55 protection rating. It is available in single-phase (4 positions, 5 A, 230 V) or three-phase (0.75 kW or 1.5 kW depending on length, 380 V) versions, to adjust extraction speed to your needs and protect the motor against overloads.
Technical specifications
| Specification | Value |
|---|---|
| Available lengths | 1.5 / 2 / 2.5 / 3 / 3.5 / 4 metres |
| Hood dimensions | H450 x D1000 mm, 300 mm front valance |
| Roof turret airflow (1.5 to 2.5 m hoods) | up to 2700 m³/h, for Ø250 or 315 duct (1.5 to 2 m hoods) or Ø315/355 (2 and 2.5 m hoods) |
| Roof turret airflow (3 to 4 m hoods) | up to 4200 m³/h, for Ø355 or 400 duct |
| Roof turret motor power | T32: 250 W (up to 2000 m³/h); T36: 250 W (up to 2750 m³/h); T40: 370 W (up to 4200 m³/h) |
| Power supply | 230 V single-phase or 380 V three-phase |
| Single-phase speed controller | 4 positions, 5 A, 230 V |
| Three-phase speed controller | 0.75 kW or 1.5 kW depending on length, 380 V |
| Speed controller protection rating | IP55 |
| Standard | F400/120 smoke extraction (400°C for 120 minutes) |
| Package weight | 90/200 kg |
| Warranty | 1 year |
Points to check before ordering
- Confirm the hood length suited to your cooking line, in line with the available duct diameter (Ø250 to Ø400 depending on model).
- Check whether your open kitchen exceeds 20 kW of cooking power, or if your walls are not fire-rated: these criteria determine whether a smoke extraction system is required.
- Choose the power supply (230 V single-phase or 380 V three-phase) according to the electrical connection available on site.
- Check the roof turret dimensions (550/570 x 550/570 x H510 or H730 mm depending on length) against your roof or facade layout.
- Ducting and connection accessories are not supplied with this package: these must be sourced separately.
Installation and connection
Ducting and connection accessories are not supplied with this package. The one-year warranty applies provided installation is carried out by a professional installer, a requirement for electrical connections.
Installation guide at télécharger ici
To be used with
- Sealed LED strip light, to equip your hood with workstation lighting.
- Roof turret duct fixing kit
- Roof turret vertical deflector kit
- CR1 5x1.5 mm fire-resistant cable
Product Details
pack400°trimono
- Selected length
- Food
- Available Length
- 2 meters
- Available Length
- 2.5 meters
- Available Length
- 3 meters
- Available Length
- 3.5 meters
- Available Length
- 4 meters
- Manufacturing
- Made in France
- Warranty
- 1 year
- Engine
- Roof fan roof
- Standard
- F400/120
- Food
- 230V Mono
- Food
- 380V Three-Phase
- Engine power
- 2,000 to 4,000 m³/h
- Engine power
- 4,000 to 6,000 m³/h
0657968797116
You might also like
8 other products in the same category:
Customers who bought this product also bought:
Frequently asked questions
What is the difference between a roof turret and a double-inlet centrifugal fan for this package?
The roof turret relocates extraction to the roof, away from the kitchen, which reduces noise in the room. A double-inlet centrifugal fan, by contrast, is housed directly in or near the hood. This package is supplied with a roof turret with horizontal discharge (T32, T36 or T40 depending on hood length), not with a double-inlet centrifugal fan.
Which roof turret airflow should I choose depending on my hood length?
For hoods from 1.5 to 2.5 metres, the roof turret (T32 or T36) reaches up to 2000 to 2750 m³/h. For hoods from 3 to 4 metres, the T40 reaches up to 4200 m³/h. The choice also depends on the duct diameter available on your installation (Ø250 to Ø400 depending on model).
Is the speed controller supplied with the smoke extraction emergency stop button?
Yes, the speed controller in this package includes an emergency stop button for forced smoke extraction mode and a gas safety connection, with an IP55 protection rating. It is available in single-phase 230 V or three-phase 380 V versions depending on the hood length chosen.
Which power supply should I choose, 230 V single-phase or 380 V three-phase?
The choice depends on the electrical connection available on site and the speed controller power required depending on hood length (0.75 kW or 1.5 kW in three-phase). Check your electrical installation before ordering, particularly for hoods from 3 to 4 metres.
Are connection ducts included in this package?
No, ducting and connection accessories are not supplied with this hood, roof turret and speed controller package. They must be ordered separately according to the duct diameter suited to your installation (Ø250 to Ø400 depending on hood length).