Commercial Rang Hood SPECIAL FOUR Pack, 1–3 m + 230V Motor + Speed Controller

Complete set with stainless steel restaurant kitchen hood and large hood for pizza oven and steam oven
Complete set with stainless steel restaurant kitchen hood and large hood for pizza oven and steam oven
POWERFUL 1,800 M³/H SNAIL PUMP
4.5A single-phase voltage regulator for range hood motors, types 7/7, 7/9, and 8/9
range hood for pizza oven and deep steam oven under a hood
Complete set with stainless steel range hood for restaurant kitchens, featuring a large hood for pizza ovens and steam ovens
Video
Complete set with stainless steel restaurant kitchen hood and large hood for pizza oven and steam oven
Complete set with stainless steel restaurant kitchen hood and large hood for pizza oven and steam oven
POWERFUL 1,800 M³/H SNAIL PUMP
4.5A single-phase voltage regulator for range hood motors, types 7/7, 7/9, and 8/9
range hood for pizza oven and deep steam oven under a hood
Complete set with stainless steel range hood for restaurant kitchens, featuring a large hood for pizza ovens and steam ovens

Complete stainless steel hood pack with a large 1.2 m overhang canopy, designed for equipment that generates a lot of heat: pizza oven, combi oven, range, boiling pan. Supplied with motor and speed controller, from 1 to 3 m.

  • Length: 1 to 3 m (1 / 1.5 / 2 / 2.5 / 3 m)
  • Double-inlet centrifugal fan: 1500, 2600 or 3000 m³/h, your choice
  • Power supply: 230V single-phase
  • Speed controller: 4.5 A, 230V
  • Manufacturing (depending on components): French, Italian and Spanish, 1 year warranty
Selected length
OPTION: More powerful engine
In stock
Quantity
738.00 Tax excluded
885,6 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The pizza oven hood pack is a dynamic stainless steel commercial kitchen hood, fitted with a large 1.2 m overhang canopy, a double-inlet centrifugal fan and a speed controller, to effectively capture smoke and steam from high heat output equipment.

This generous canopy isn't a cosmetic detail: it compensates for the heat projected by a pizza oven, a combi oven, a steam oven, a large range, a bratt pan or a boiling pan, equipment whose hot zone often extends well beyond the cooking surface itself. Delivered flat in a box, it can be assembled in about twenty minutes by two people.

Technical specifications

Specification Value
Available lengths 1 m, 1.5 m, 2 m, 2.5 m, 3 m
Dimensions (standard range) L 1000 to 3000 x D 1200 x H 450 mm (canopy drop H 260 mm)
Motor type Double-inlet centrifugal fan
Motor output options 1500 m³/h, 2600 m³/h or 3000 m³/h
Power supply 230V single-phase
Speed controller 4.5 A, 230V
Manufacturing France
Warranty 1 year

Use and compatibility

This hood pack is designed for kitchens fitted with a pizza oven, a pita bread oven, a baker's oven, a steam oven or a large range, in restaurants, snack bars or catering kitchens. The 1.2 m canopy captures the heat that spreads well beyond the cooking surface, something that shorter standard hoods don't always cover. Extraction can be set up through the top or the back of the hood, as you prefer: the fan is supplied unfitted, placed inside the hood, so you can make this choice at installation.

Installation and connection

Ducting and connection accessories are not supplied with this pack (see our accessories range). As a guide, and depending on your ductwork, the recommended galvanised duct diameter increases with the length of the hood: Ø200 mm minimum (or 250 mm) for a 1 m hood, 200 to 315 mm for 1.5 m, 250 to 355 mm for 2 m, 315 or 355 mm for 2.5 m, 355 or 400 mm for 3 m. The larger the diameter, the less the ductwork suffers from pressure loss and noise. Above 20 kW of installed cooking equipment, a smoke extraction system rated 400°C/120 min should be considered: check this threshold with your design office or your premises' regulations before deciding. The electrical connection must be carried out by a qualified professional, as a condition of the warranty. An installation guide is available to download, and assembly tutorials are also available on our YouTube channel.

Points to check before ordering

  • The hood length suited to your cooking line (oven, range, boiling pan) and the available space.
  • The fan output (1500, 2600 or 3000 m³/h) based on your cooking intensity and the number of appliances under the hood.
  • The duct diameter required for the length chosen, to avoid an undersized ductwork system.
  • The total output of your cooking equipment, to anticipate a possible requirement for 400°C/120 min smoke extraction above 20 kW.
  • The extraction direction you want (top or rear), since the fan is supplied unfitted inside the hood.

Pairs well with

Also check out our full range of dynamic hoods, including the compact hood pack for food trucks and the hood pack with remote fan box.

Product Details

Ventilsogood
PackhotFour1-3 m
Selected length
OPTION: More powerful engine
Available Length
1 meter
Available Length
1.5 meters
Available Length
2 meters
Available Length
2.5 meters
Available Length
3 meters
Manufacturing
Made in France
Warranty
1 year
Engine
Centrifugal Fan
Food
230V Mono
Engine power
0 to 2,000 m³/h
Engine power
2,000 to 4,000 m³/h
0657968459243

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

Is this hood suitable for a pizza oven or a steam oven?

Yes, this pack is designed for high heat output equipment such as pizza ovens, combi ovens, steam ovens, baker's ovens or large ranges. Its 1.2 m overhang canopy captures the heat that spreads beyond the cooking zone, making it a good choice for this type of equipment.

What is the difference between a double-inlet fan and a centrifugal fan?

These refer to the same type of motor: the double-inlet fan, also called a centrifugal fan, uses centrifugal force to extract the air. On this pack, it is available in three output options: 1500, 2600 or 3000 m³/h, depending on your cooking intensity.

What duct diameter should I plan for depending on the hood length?

As a guide, allow a minimum diameter of 200 mm for a 1 m hood, up to 355 or 400 mm for a 3 m hood. The larger the diameter, the less pressure loss the ductwork experiences. The exact diameter also depends on the length and the number of elbows in your installation.

Is the fan already fitted to the hood on delivery?

No, the fan is supplied unfitted, placed inside the hood. This lets you freely choose the extraction direction, through the top or the back of the hood, at the time of installation.

Is a special extraction system required above a certain cooking load?

Above 20 kW of installed cooking equipment, a smoke extraction system rated 400°C/120 minutes may be required depending on your premises' regulations. This threshold should be checked with your design office before finalising your installation.

Is there a tutorial for fitting this hood pack?

Yes, in addition to the downloadable installation guide, assembly tutorials are available on our VentilSoGood YouTube channel, to guide you step by step through assembling the hood and connecting the fan.