The extra-flat extract fan box, 500 m³/h, D160 mm is a motorised extraction unit designed for mechanical ventilation in residential, commercial or professional premises, where the available height is limited. It stands out for its quiet operation and low power consumption.
An extract fan box designed for tight spaces
Its extra-flat design, with dimensions of only L 360 x D 360 x H 200 mm, allows it to fit into a suspended ceiling, a low loft space or a plant room with limited headroom, where a standard fan box would not fit. The direct-drive fan motor assembly ensures quiet, stable operation, with a thermally protected motor in case of overheating, while keeping day-to-day power consumption low.
Technical specifications
| Specification |
Value |
| Airflow |
500 m³/h |
| Connection diameter |
160 mm |
| Dimensions |
L 360 x D 360 x H 200 mm |
| Power supply |
230 V single phase |
| Motorisation |
Motorised fan box |
| Installation |
Horizontal, indoor or outdoor |
| Made in |
France |
| Warranty |
1 year |
| Weight |
15 kg |
Use and system compatibility
This extract fan box suits an existing ventilation system in 160 mm diameter, for extraction or transfer depending on the chosen configuration. As a guide, it can be fitted into a system equipped with fan boxes such as Vim KMDT, Aldes Vec, Atlantic Critair or France Air Sirius: always check the diameter and connection method of your installation before ordering.
Installation and connection
The fan box is installed horizontally, indoors or outdoors. The circular spigots fitted with lip seals ensure an airtight connection to the ductwork, and the removable cover provides easy access for maintenance. This shop sells the equipment only: electrical connection must be carried out by a qualified professional, a condition that must be met for the warranty to apply.
Points to check before ordering
- The diameter of your existing ductwork: this model is designed for 160 mm, not to be confused with the 125 mm or 200 mm versions in the range.
- The airflow actually required for your premises: a long duct run or one with several elbows reduces the usable airflow compared to the stated rate.
- The available height in the suspended ceiling or loft space: with its 200 mm height, this extra-flat fan box fits into tight plenums, but check the clearance needed for the spigots on either side.
- Whether you need a sound-attenuated version if the premises are particularly sensitive to noise, in which case another reference in the range will be more suitable.
- The available electrical supply (230 V single phase) and the presence of suitable circuit protection.
To pair with
If you need a higher airflow or a sound-attenuated version, you can find the sound-attenuated version of the same 500 m³/h D160 mm model or the extra-flat fan box 800 m³/h D250 mm in our range.