Wire-mesh whistle with horizontal outlet
The wire-mesh whistle with horizontal outlet protects your ventilation ductwork on a wall outlet while letting air flow freely, with a pest-guard mesh that keeps out leaves, insects and small animals.
- Diameter: choice of 125 to 800 mm
- Projection: 10 to 60 cm depending on diameter
- Material: galvanised steel
- Fixing: self-tapping screws, sealing gasket and/or duct tape
- Use: wall/facade outlet (wall, food truck) only
Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
Wire-mesh whistle with horizontal outlet: pest-guard mesh for ventilation ductwork
The wire-mesh whistle with horizontal outlet is a male fitting in galvanised steel that fits onto the end of a duct to discharge air while preventing dead leaves, insects, birds or small animals from getting in. Available in diameters from 125 to 800 mm, it is suitable for wall outlets and food truck installations.
Technical specifications
| Specification | Value |
|---|---|
| Material | Galvanised steel |
| Diameter | 125, 160, 200, 250, 315, 355, 400, 450, 500, 560, 630, 710, 800 mm |
| Projection | 10 to 60 cm depending on the diameter chosen |
| Fixing | Self-tapping screws, sealing gasket and/or duct tape |
| Weight | 2 kg (1 kg parcel) |
| Warranty | 1 year |
Use and suitability: wall outlet, not roof mounting
This wire-mesh whistle is designed for a horizontal wall outlet, on a wall or the side panel of a food truck. It is not a substitute for a roof cowl: if your ductwork runs out through the roof, you should use a roof fan or a cowl designed for vertical outlets instead, as this whistle is not intended for that type of installation. Its built-in mesh guard stops outside debris building up at the duct opening, which reduces how often the ductwork needs cleaning, though regular maintenance is still required.
Installation and connection
The male fitting slides directly into your existing duct, matching the diameter. It is fixed in place using self-tapping screws, together with a sealing gasket and/or duct-specific tape to ensure the wall penetration is properly sealed. Any electrical connection for associated equipment (motor, motorised roof fan upstream) must be carried out by a qualified professional, a requirement for the warranty to apply.
Points to check before ordering
- Check the exact diameter of your duct before ordering: the whistle is a male fitting that inserts into it, and a difference of just a few millimetres can prevent a proper fit.
- Check that your outlet is indeed a horizontal wall/facade outlet (wall, food truck) and not a roof outlet, as this whistle is not designed for that use.
- Allow for the projection of the whistle once installed (10 to 60 cm depending on diameter) to make sure it doesn't obstruct a walkway or a crowded facade.
- Plan for additional sealing material if the supplied gasket isn't sufficient for your installation (wall type, thickness).
Pairs well with
- 2-metre rigid galvanised steel duct, to extend your ductwork run to the outlet
- Galvanised female connector, for a neat join between duct sections
- Wall ventilation outlet shutter, an alternative with a flap for your wall outlet
Product Details
- Diameter
- Products
- Outdoor Outings
- Products
- Grille / Air Inlet / Diffuser
- Warranty
- 1 year
- Package weight
- 1 kg
You might also like
8 other products in the same category:
Customers who bought this product also bought:
Frequently asked questions
What's the difference between a wire-mesh whistle and a roof cowl?
The wire-mesh whistle with horizontal outlet is designed for a wall outlet, on a wall or the side panel of a food truck. It is not intended for a roof outlet: for vertical discharge on a roof, you should use a cowl or roof fan designed for that type of installation.
How do I choose the right diameter for the wire-mesh whistle?
The wire-mesh whistle is a male fitting that slides directly into your existing duct. Measure the internal diameter of your duct precisely before ordering, from the available diameters of 125 to 800 mm, to ensure a proper fit.
How is the wire-mesh whistle fixed to the duct?
It is fixed using self-tapping screws, together with a sealing gasket and/or duct-specific tape, to ensure a good seal at the wall outlet.
How far does the wire-mesh whistle project once fitted?
The projection ranges from 10 to 60 cm depending on the diameter chosen: the larger the diameter, the further the whistle projects from the facade. Check this clearance before installation, particularly on a food truck or an uncluttered facade.
Is the wire-mesh whistle suitable for a restaurant kitchen hood or a food truck?
The wire-mesh whistle with horizontal outlet is suitable for a wall or food truck outlet, in galvanised steel. For use with a commercial kitchen hood, check that the diameter matches your ductwork at the hood outlet.