The single-flow VMC air vent is a ventilation accessory that regulates the extracted airflow at a constant rate, regardless of network pressure, for a self-regulating (constant airflow) VMC system in residential or commercial premises. It comes in six fixed airflow rates, from 15 to 120 m³/h, suitable for anything from a WC to the kitchen of a large home.
Technical specifications of the self-regulating VMC air vent
| Specification |
Value |
| Product type |
Grille / Air vent / Diffuser |
| Operation |
Self-regulating, fixed airflow |
| Available airflow rates |
15, 30, 45, 75, 90, 120 m³/h |
| Operating pressure range |
50 to 160 Pa |
| Connection diameter |
Ø125 mm |
| Material |
Polystyrene |
| Grille |
Central, removable |
| Weight |
0.5 kg |
| Warranty |
1 year |
Which airflow rate should you choose for each room?
Each airflow rate in m³/h corresponds, as a guide, to a type of room. This is a sizing reference to be adjusted according to your ductwork, not an absolute rule:
- 15 m³/h: WC
- 30 m³/h: WC or bathroom
- 45 m³/h: bathroom or living room
- 75 m³/h: 1-bed flat kitchen
- 90 m³/h: 2-bed flat kitchen
- 120 m³/h: 3 or 4-bed flat kitchen
This air vent is used together with air inlets, or as a replacement in an existing self-regulating VMC installation.
Installation and connection
The self-regulating VMC air vent can be fitted either on a wall or on a ceiling. Whichever airflow model you choose, the fitting principle stays the same.
For wall mounting, the air vent simply clips onto a Ø125 mm sleeve fitted beforehand on the duct: the lip seal ensures the assembly is airtight.
For ceiling mounting, it can be fitted using a 3-tab plasterboard sleeve or a Ø125 mm or Ø125/80 mm slab-crossing sleeve. To fit the 3-tab plasterboard sleeve, turn anticlockwise, then lock it in place by turning clockwise.
The air vent has 3 fixing tabs: we recommend screwing it to the wall or ceiling using the 3 screws provided, for a secure, long-lasting fit.
Points to check before ordering
- The diameter of your existing duct: this air vent connects at Ø125 mm, check that your sleeve matches.
- The airflow rate suited to the room in question: a WC does not have the same requirements as a kitchen, refer to the guide table above.
- The type of mounting planned: wall (sleeve) or ceiling (3-tab sleeve or slab-crossing sleeve).
- Compatibility with your existing self-regulating ventilation system, and the presence of associated air inlets.
Goes well with
To complete your installation, also take a look at our wide range of VMC accessories, our galvanised VMC reducer, our semi-rigid VMC duct and our PVC clip-on sleeve for VMC air vent. Looking for an adjustable airflow rate rather than a fixed one? Check out our adjustable VMC air vent with PVC sleeve.