2 m² Self-Adhesive Soundproofing Roll
Insulate your fan boxes to reduce noise and vibration
The self-adhesive soundproofing roll covers your existing extraction fan boxes for better acoustic comfort in commercial kitchens or ventilation systems, without having to buy a new fan box.
- Dimensions: L 2000 x H 1000 mm, thickness 13 mm
- Coverage: one length for a fan box of approximately 700 x 700 x 700 mm (with two spigots)
- Noise reduction: up to 5 dB when fitted on the outside of the fan box, 3 dB on the inside
- Ultra Fresh protection against bacteria and mould, anthracite colour
- Fire reaction: EN 13501-1, classification B-s3,d0
Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
Self-adhesive soundproofing insulation for fan box: acoustic foam for commercial kitchen extraction fan boxes
The self-adhesive soundproofing insulation is a 2 m² roll of flat acoustic foam with a self-adhesive backing, designed to cover the inside (not recommended) or the outside (strongly recommended) of a fan box and reduce the noise generated by extraction in a commercial kitchen. No need to buy a new soundproofed fan box: simply stick this solution directly onto your existing fan box.
This 13 mm thick thermo-acoustic insulation helps reduce vibration and resonance from the fan box while the double-inlet centrifugal fan is running. In terms of finish, the self-adhesive version is faced on one side with a reinforced, meshed acrylate base, covered with a polyethylene film, and benefits from Ultra Fresh protection, which reduces the development of bacteria and mould, a real advantage in the humid environment of a commercial kitchen.
Technical specifications
| Specification | Value |
|---|---|
| Dimensions | L 2000 x H 1000 mm, thickness 13 mm |
| Coverage area | 2 m² |
| Fan box equivalence | one length for a fan box of approximately 700 x 700 x 700 mm, with two spigots |
| Foam type | flat acoustic foam, thermo-acoustic |
| Noise reduction | up to 5 dB fitted on the outside of the fan box, 3 dB on the inside |
| Fixing | self-adhesive, reinforced meshed acrylate base, polyethylene film |
| Treatment | Ultra Fresh protection against bacteria and mould |
| Colour | anthracite |
| Fire reaction | EN 13501-1, classification B-s3,d0 |
| Operating temperature (self-adhesive version) | -45°C to +110°C |
| Weight | 5 kg |
Use and fitting on a fan box
This roll is stuck onto an extraction fan box to reduce the noise and vibration generated by the double-inlet centrifugal fan during operation. It is a retrofit accessory: it is applied to a fan box already in place, without major structural changes. For noise reduction, fitting on the outside of the fan box is more effective (up to 5 dB) than fitting on the inside (3 dB), something to bear in mind depending on the space available around your fan box.
Points to check before ordering
- Measure the internal or external dimensions of your fan box: a 2 m² roll covers a fan box of approximately 700 x 700 x 700 mm with two spigots, allow for several rolls for a larger fan box.
- Check the condition of the galvanised surface of the fan box: it must be clean and dry for the acrylate base to adhere properly.
- Choose the fitting side according to the level of noise reduction required: the outside of the fan box provides better noise reduction than the inside.
- Check that the EN 13501-1 fire classification (B-s3,d0) meets the requirements of your premises, particularly for public-access buildings. Please note: this is a flammable insulation material!
- Observe the operating temperature range of -45°C to +110°C both during fitting and in service.
To use with
You might also like
8 other products in the same category:
Customers who bought this product also bought:
Frequently asked questions
How much coverage do I need to insulate my fan box?
One length of the self-adhesive soundproofing roll, i.e. 2 m², covers a fan box of approximately 700 x 700 x 700 mm with two spigots. For a larger fan box, allow for several rolls by measuring the surfaces to be covered before ordering.
How much noise reduction can be expected with this soundproofing insulation?
The self-adhesive soundproofing roll can reduce noise by up to 5 dB when fitted on the outside of the fan box, and by around 3 dB when fitted on the inside. The 13 mm thickness also helps reduce vibration and resonance from the fan box.
Is the product fire rated?
The self-adhesive version of this soundproofing roll is classified according to EN 13501-1 as B-s3,d0 for fire reaction. It is not fire-retardant, so it is potentially flammable! Not compatible with F400/120 or C4 standards for internal insulation. Check that this classification meets the safety requirements of your premises, particularly for public-access buildings.
How is the soundproofing insulation fitted onto a galvanised steel fan box?
The roll is self-adhesive, faced with a reinforced acrylate base covered with a polyethylene film: it is stuck directly onto the surface of the fan box, which must be clean and dry for proper adhesion. Observe the operating temperature range of -45°C to +110°C.
Should I insulate an existing fan box or buy a new soundproofed one?
If your fan box motor works well but is noisy, this self-adhesive soundproofing roll lets you soundproof it without replacing it. It is applied directly onto the existing fan box, a more economical solution than a new fan box if the structure is still in good condition.