The CVEC1500 or VEC240 subassembly motor is a compatible replacement fan motor for ALDES mechanical ventilation systems or plant rooms, reference 11056098 (among others), with a maximum airflow of 2650 m³/h. When the original motor in a C.VEC 1500 or VEC 240 unit fails, it's often the only part you need to replace to get the whole system running normally again.
A double-inlet centrifugal fan motor designed to replace your CVEC1500 or VEC240
This double-inlet centrifugal fan motor, made by S&P, is compatible with the C.VEC 1500 and VEC 240 models. It works in the standard way for a commercial or communal mechanical ventilation motor: air is driven by centrifugal force to provide extraction or ventilation for your ductwork, whether on a mechanical ventilation system or in a plant room.
Technical specification
| Specification |
Value |
| Reference |
Dd99aldes3vvmc (compatible ALDES 11056098) |
| Motor model |
DD 9/9, 6 pole |
| Maximum airflow |
2650 m³/h |
| Power |
200 W |
| Current |
1.9 A |
| Supply |
230V single phase |
| Protection rating |
IP54, with built-in capacitor |
| Standard |
CE |
| Weight |
10 kg |
| Dimensions |
L 37 x D 40 x H 34 cm |
| Manufacture |
Made in Europe |
| Warranty |
1 year |
Which installations is it compatible with?
This motor is designed for C.VEC 1500 and VEC 240 units, in standard or Hygro versions. It fits commercial and communal mechanical ventilation systems as well as plant rooms, wherever the original motor subassembly has failed.
If stock runs out and you need a temporary fix with a 3 speed motor, fitting a DD99 3V set to speed 1 gets you close to the original airflow, as a practical reference point rather than a guaranteed equivalent.
Installation and wiring
The motor fits onto the existing frame on your unit: the mounting frame is not included with this motor, so check that yours is reusable before ordering. Electrical connection must be carried out by a qualified electrician, which is a condition for keeping the warranty valid.
Points to check before ordering
- Your unit is indeed a C.VEC 1500 or VEC 240.
- The original mounting frame is still in good condition, as it is not supplied with this motor.
- Your ductwork (length, elbows, filters) remains consistent with a maximum airflow of 2650 m³/h, bearing in mind that elbows and duct length reduce actual airflow.
- The available supply is indeed 230V single phase.
Goes well with