<p>The <strong>Centrifugal Fan DDM9/9</strong> is a <strong>double-inlet centrifugal fan</strong> by <strong>Nicotra Regal</strong>, designed to fit a commercial kitchen hood or extraction fan box with a high airflow: <strong>3,600 m³/h</strong> for a power rating of <strong>550 W</strong>. This motor has a proven track record in high-output kitchens.</p>
<h2>Please check compatibility before ordering</h2>
<p>This <strong>DDM9/9</strong> is <strong>not compatible with most hoods</strong> on the market. If you are looking for a model compatible with all hoods, we recommend the <strong>99R</strong>. This 9/9 motor is suitable for hoods and extraction fan boxes with an <strong>internal height greater than 500 mm</strong>: Saftair, France Air, Sodeca, S&P, Alvène, Bertrand, VIM, among others. It is <strong>not suitable for 400°/2h smoke extraction</strong>.</p>
<h2>Technical specifications</h2>
<table class="vsgai-specs">
<tbody>
<tr>
<th>Specification</th>
<td>Value</td>
</tr>
<tr>
<th>Reference</th>
<td>DDM99 (DDM9/9, type 9/7 - 9/9)</td>
</tr>
<tr>
<th>Airflow</th>
<td>3,600 m³/h</td>
</tr>
<tr>
<th>Power</th>
<td>550 W</td>
</tr>
<tr>
<th>Current</th>
<td>4.6 A</td>
</tr>
<tr>
<th>Supply</th>
<td>230 V (220 V per nameplate) single-phase</td>
</tr>
<tr>
<th>Protection rating</th>
<td>IP54, with capacitor</td>
</tr>
<tr>
<th>Supplier code</th>
<td>E6G3501</td>
</tr>
<tr>
<th>Frame dimensions</th>
<td>L 300 x D 260 mm, 20 mm flanges</td>
</tr>
<tr>
<th>Minimum internal height of hood/fan box</th>
<td>500 mm</td>
</tr>
<tr>
<th>Smoke extraction</th>
<td>Not compatible with 400°/2h</td>
</tr>
<tr>
<th>Weight</th>
<td>15 kg (18 kg packed)</td>
</tr>
<tr>
<th>Manufacturer</th>
<td>Nicotra Regal, ISO 9001 certified</td>
</tr>
<tr>
<th>Warranty</th>
<td>1 year</td>
</tr>
</tbody>
</table>
<h2>9/9 centrifugal fan equivalents</h2>
<p>The <strong>DDM9/9</strong> is equivalent to the following references, useful if you are replacing an existing motor: CBD 2525, 241/241 Nicotra/Regal/Casal/Metro/VIM <strong>DD9/9</strong>, Sodeca <strong>CBD-2525</strong>, S&P <strong>CBM</strong> 9/9, <strong>CMC DAIN</strong> 9/9, Sisteven <strong>DTM-B-9/9</strong>.</p>
<h2>Points to check before ordering</h2>
<ul>
<li>Measure the <strong>internal height</strong> of your hood or extraction fan box: it must exceed 500 mm to fit this motor.</li>
<li>Check the <strong>frame dimensions</strong> (300 x 260 mm, 20 mm flanges) against the available space.</li>
<li>Check your power supply: this model runs on <strong>230 V</strong> single-phase.</li>
<li>If your installation requires regulatory 400°/2h smoke extraction, this motor is <strong>not suitable</strong>: it is not certified for this use.</li>
<li>Actual airflow depends on your ductwork (duct length, elbows, filters): 3,600 m³/h corresponds to the airflow under reference conditions.</li>
</ul>
<h2>Fan box version</h2>
<p>Choose the fan box version:</p>
<p>
</p>
<h2>Pair with</h2>
<ul>
<li><a href="https://www.ventilsogood.com/en/59-engine-installation-kit-gasket-hardware.html">Motor fitting kit: gasket and fixings</a></li>
<li><a href="https://www.ventilsogood.com/en/132-8a-230v-voltage-regulator-for-professional-range-hood-motors-9-9-and-10-10.html">8 A 230 V speed controller for 9/9 and 10/10 motors</a></li>
<li><a href="https://www.ventilsogood.com/en/1024-support-feet-for-worm-gear-motor-with-screws-and-silent-blocks.html">Centrifugal fan support feet with anti-vibration mounts</a></li>
<li><a href="./362-moteur-escargot-ddm77-2500-m3h-top-qualite-robustesse.html">DDM7/7 motor, 2,500 m³/h</a>, more compact format</li>
<li><a href="./84-moteur-escargot-dd7-9-2600-m3h.html">DD7/9 motor, 2,600 m³/h</a>, for intermediate use</li>
</ul>
<p>View our full range on the <a href="https://www.ventilsogood.com/en/14-centrifugal-fan">centrifugal fans</a> page.</p>