Exhaust Unit for a Commercial Range Hood

Remote-Mounted Motor Unit for Professional Kitchens

Our extraction units allow the motor of the commercial range hood to be relocated, effectively removing smoke, grease, and odors while reducing noise in the kitchen.

Depending on the required airflow and the installation configuration, choose a motorized unit, a soundproofed unit, or an extraction turret. For installations subject to smoke extraction requirements, we also offer F400/120 extraction units.

Affichage de 5 article(s)

Offset exhaust fan housing for a mechanical ventilation system and a professional kitchen

Extraction units

PREMIUM Motor Housing 4000 m³/h (10/10) - 220 V

SAFTAIR

saft10/10

620.00 Tax excluded

In stock

Saftair Motor Enclosure for kitchen Commercial Rang Hood s (2 to 3 m long) or fresh air supply (compensation) - Dimensions: ~600x600xH600mm- Internal electrical box- Exhaust unit with dual-outlet screw fan, 4,000 m³/h - 550 W - 5.7 A - 230 V- Existing 400 mm diameter inlet and outlet- Provide reducers if necessary for your duct size (see Accessories tab)-...

Extraction units

12/12 Cabinet, 6,000 m³/h, 230 V, Soundproofed

Ventilsogood

CM1212techisol

595.00 Tax excluded

In stock

Insulated enclosure with 12/12: Quiet and Powerful. - Insulated enclosure with 12/12 6-pole motor –6,000 m³/h – 850 rpm – 6 A – 750 W- 230 V IP54- Recommended inlet flange and outlet spigot: D 450 mm (not included) - Housing dimensions: W 720 x D 650 x H 600 mm- With sound-absorbing foam inside (max. operating temperature 50°)- Not compatible with F400°...

12/12 Offset Exhaust Fan Housing for Professional Kitchens, 6,000 m³/h

Extraction units

PREMIUM Motor Housing 6000 m³/h (12/12) 220 V

SAFTAIR

saft12

822.00 Tax excluded

In stock

Saftair motor unit for large range hoods measuring 4 to 6 m. - Exhaust unit dimensions: W 700 x D 700 x H 700 mm- Capacity: 6,000 m³/h - 230 V - 750 W- Existing inlet/outlet: D 450 mm- Provide reducers as needed for your duct size (see Accessories tab)- Ducts and connection accessories not included (see Accessories tab)- Not compatible with F400° smoke...

Motors for commercial range hoods

Compact Turbine Housing 10/10, 1.1 kW, 4,000/5,500 m³/h, 220 V, F400/120

Tecnifan

Caisson1010400

1,470.00 Tax excluded

In stock

Powerful and compact motorized hood—Complies with Standard 400°/2h —max 5,500 m³/h, 220 V. For professional Commercial Rang Hood s or C4 mechanical ventilation systems. - Complies with Smoke Exhaust Standard 400/F120 for cooking ranges with a power rating > 20 kW (gas or electric) in open-concept kitchens. - Max. flow rate: 5,500 m³/h at 200 Pa (VMC) –...

99-series air-injection unit with G4 filter

Extraction units

Air Injection Unit with G4 Filtration, 4,000 m³/h - 220V

Ventilsogood

cais129insufl

1,065.00 915.00 Tax excluded

In stock

Filtered air supply unit (HACCP) to compensate for air extraction by the professional kitchen range hood. Motorized unit with a 12/12 dual-inlet worm gear motor + G4 filtration - Air supply unit with a 12/12 dual-inlet worm gear motor- Capacity: 6,000 m³/h - 750 W- 5.5 A - 220/230 V - CE (airflow after filtration > 4,000 m³/h)- Unit dimensions: L 700 x D...

Which extraction fan box should you choose?

The right extraction fan box depends mainly on the size of the range hood, the type of cooking, and the diameter and length of the ductwork. Our range includes different airflow capacities for both small and large installations.

For even lower noise levels, choose a sound-insulated extraction fan box. We also offer empty fan boxes, allowing you to install the appropriate fan separately.

F400/120 extraction fan boxes

For installations subject to smoke extraction requirements, we also offer F400/120 extraction fan boxes designed to operate at 400°C for 120 minutes.

Need help choosing your extraction fan box?

To determine the correct airflow and equipment, consider the size of the range hood, cooking appliances, duct diameter and length, and the number of bends. If you are unsure, send us this information and we will help you select the right equipment for your installation.