Engine Mounting Bracket 9/9 10/10

Bare galvanized steel housing for a restaurant range hood motor or mechanical ventilation system
galvanized bare housing for range hood motor
empty box
engine compartment
Bare galvanized steel housing for a restaurant range hood motor or mechanical ventilation system
galvanized bare housing for range hood motor
empty box
engine compartment

The Ventilsogood 9/9-10/10 bare fan box houses the double-inlet centrifugal fan motor of your choice (9/7, 9/9 or 10/10) so you can build your own extraction or supply fan box, in robust galvanised steel.

  • Type: fan box only, supplied without motor
  • Dimensions: 600 × 600 × 630 mm
  • 2 access doors for maintenance and fitting
  • Compatible with 9/7, 9/9, 10/10 motors (not included)
  • Use: extraction or supply air, commercial kitchen hood or mechanical ventilation system
In stock
Quantity
184.00 Tax excluded
220,8 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

Engine Mounting Bracket 9/9 10/10: the housing that adapts to your ductwork

The Ventilsogood 9/9-10/10 bare fan box is an empty extraction fan box in galvanised steel, designed to house a double-inlet centrifugal fan motor type 9/7, 9/9 or 10/10, for extraction as well as supply air.

No motor built in here: that's the whole point of a bare fan box. You choose your motor according to the airflow required, fit it yourself in the orientation that best suits your ductwork, and keep full control over the sizing of your entire air handling system. A solution favoured by ventilation installers who build their own bespoke installation rather than settling for an off-the-shelf unit.

Technical specifications

Specification Value
Reference Caissonnu99
Type Fan box only, without motor
Material Galvanised steel
Dimensions 600 × 600 × 630 mm
Access 2 access doors
Spigots Not pre-cut, spigots to be ordered separately
Compatible motors 9/7, 9/9, 10/10 (not included)
Package weight 10 kg

Use and compatibility

This fan box acts as a plenum in a commercial kitchen ventilation system or a professional mechanical ventilation system. Once the motor is fitted, the fan box becomes a powered unit and can operate either in extraction or supply air mode, depending on the mounting orientation chosen.

Installation and connection

The fan box is supplied uncut: flat spigots for inlet and outlet must be allowed for and ordered separately as accessories. The motor fitting kit (gasket and fixings) makes fitting the motor into the fan box easier. Electrical connections must be carried out by a qualified professional; this is a condition for the warranty to apply.

Points to check before ordering

  • Check that the chosen double-inlet centrifugal fan motor (9/7, 9/9 or 10/10) matches the internal dimensions of the fan box
  • Plan for and order the inlet and outlet spigots, not supplied with the bare fan box
  • Estimate the required airflow based on your hood, cooking equipment and the length of your ductwork: a long run with elbows increases pressure losses, so actual airflow depends on the overall system design
  • Check the available space in your plant room or on the roof before confirming the 600 × 600 × 630 mm dimensions
  • Confirm that your electrical installation is suitable for the chosen motor (single-phase 230 V or three-phase, depending on the model selected)

Recommended with

A robust, modular fan box, for building exactly the extraction system your kitchen needs.

Product Details

Ventilsogood
Caissonnu99
Package weight
10 kg
Cabinet Type
Cabinet only
0657968546271

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

What is the difference between this bare fan box and a fan box with motor already fitted?

The Ventilsogood bare fan box is an empty galvanised steel housing, supplied without motor: you choose and fit the double-inlet centrifugal fan motor that suits your required airflow yourself. A motorised fan box is supplied with its motor already fitted and wired, ready to connect, but without the same freedom to choose the motor model.

Which motor should I choose for this fan box: 9/7, 9/9 or 10/10?

The bare fan box can accept a double-inlet centrifugal fan motor type 9/7, 9/9 or 10/10. The choice depends on the airflow required for your hood or ventilation system: the larger the motor, the higher the potential airflow, but you also need to take into account the pressure losses in your installation.

Is the fan box supplied with inlet and outlet spigots?

No, the fan box is supplied uncut. You need to plan for and order the flat inlet and outlet spigots separately, available as accessories in the shop, before finalising your installation.

Can this fan box be used for both supply and extraction?

Yes, once the motor is fitted, the fan box works in extraction or supply air mode depending on the mounting orientation chosen. This versatility means it can be used both for a commercial kitchen hood and for a professional mechanical ventilation system.

Is this fan box suitable for a mechanical ventilation system or only for a restaurant hood?

The 9/9-10/10 bare fan box can be used as a plenum in a commercial kitchen ventilation system as well as in a professional mechanical ventilation installation, for extraction or supply air.