"
The Compact Turbine Unit 9/9 from Tecnifan is a motorised extraction fan box combining kitchen air extraction with F400/120 smoke extraction, delivering an airflow of 3,000 to 4,000 m³/h on 230V single-phase. Compact and robust, it is the heart of the extraction system for a professional kitchen running daily, while meeting the fire safety requirement for high-power cooking lines.
\n
Technical specifications
\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
| Specification |
Value |
| Brand |
Tecnifan |
| Fan |
9/9, type AT, 4-pole |
| Airflow |
3,000 to 4,000 m³/h (4,000 m³/h at 400 Pa, 5,000 m³/h max) |
| Speed |
1,410 rpm |
| Power |
1,100 W |
| Current |
5 A |
| Supply |
230V single-phase, CE |
| Noise level |
86 dB |
| Standard |
F400/120 smoke extraction (400°C, 2h) |
| Connection diameter |
355 or 400 mm (spigots supplied, rectangular inlet/outlet) |
| Dimensions |
L 800/850 x D 755 x H 540 mm |
| Weight |
90 kg |
| Manufacture |
Europe |
| Warranty |
1 year |
\n
Use and compatibility
\n
This motorised extraction fan box is sized for a commercial kitchen hood in a restaurant or catering establishment kitchen of less than 3 metres, as a guide only, depending on the ductwork configuration. Its dual function, everyday extraction and F400/120 smoke extraction, makes it a suitable solution for open kitchens where regulations, depending on the project, require fire resistance for high-power cooking lines: check this point with your building control body before ordering, as exact compliance depends on the regulations applicable to your premises. The 2 removable panels give easy access to the fan for maintenance.
\n
Installation and connection
\n
The unit is supplied with 2 inlet and outlet spigots, in the diameter chosen (355 or 400 mm), either to be fitted by yourself or already fitted depending on the option selected. The electrical connection must be carried out by a qualified professional, as a condition of the warranty. VentilSoGood supplies the equipment without installing it: installation tutorials are available on our YouTube channel to guide you.
\n
Points to check before ordering
\n
\n
- Airflow required for your hood: a common guideline for a 2.5 m hood with a fryer and plancha is around 2,600 m³/h minimum, to be adjusted according to your ductwork, extraction capture and make-up air.
\n
- Connection diameter: check that 355 or 400 mm matches your existing ductwork before choosing the variant.
\n
- Duct length and number of elbows: these increase pressure losses and reduce actual airflow compared with the stated free-air rating.
\n
- F400/120 regulatory requirement: confirm with your building control body whether your open kitchen is affected, as the stated standard does not replace a project-by-project assessment.
\n
- Overall dimensions: L 800/850 x D 755 x H 540 mm, to compare against the space available in the ceiling void or plant room.
\n
\n
To pair with
\n
\n
Similar product without smoke extraction certification: 10/10 230V sound-insulated extraction fan box.
"