The DD133/190 motor is a double-inlet centrifugal fan motor designed to fit a mechanical ventilation fan box, a small semi-commercial extraction hood, or a plant room fan such as an air curtain or unit heater. It delivers a maximum airflow of 720 m³/h on 230V single-phase.
Technical specifications
| Specification |
Value |
| Reference |
CBM133190 |
| Maximum airflow |
720 m³/h |
| Power supply |
230V single-phase |
| Motor type |
Double-inlet centrifugal fan motor |
| Protection rating |
IP44 (IP55 with the addition of a weatherproof enclosure such as a junction box) |
| Manufacturing |
Europe (Italy) |
| Warranty |
1 year |
| Package weight |
5 kg |
Use and compatibility
This double-inlet centrifugal fan motor works on the centrifugal principle: air is drawn in at the centre of the impeller and discharged around its circumference, a simple, proven design used in most commercial and residential mechanical ventilation fan boxes. The DD133/190 is suitable for an extraction fan box as much as for a small semi-commercial extraction hood or a plant room fan (air curtain, unit heater). With built-in capacitor and terminal block, it is supplied with its mounting frame, ready to replace a tired motor before the first cold snap of winter or a breakdown mid-service.
It is compatible with most fan boxes on the market, regardless of the original brand: Caladair, Vim, Cairox, France Air, Ouest Ventil, Atlantic, Aldes, among others. An ideal replacement for anyone looking to give an existing installation a second life without replacing the whole system.
Installation and wiring
The DD133/190 motor connects on 230V single-phase via its terminal block, with the capacitor already fitted. Its IP44 protection rating is suitable for standard installation in a duct or fan box; for installations exposed to moisture, fit an additional weatherproof enclosure such as a junction box to achieve IP55. Electrical connection must be carried out by a qualified electrician, a condition required for the warranty to apply in full.
Points to check before ordering
- Duct diameter: this motor is designed for a 160 to 200 mm duct network, as a guide depending on the configuration of your existing ductwork.
- Required airflow: 720 m³/h is a maximum free-air flow rate; actual airflow depends on elbows, duct length and pressure losses within the network.
- Mounting frame dimensions: check that it fits the available space in your current fan box or ducting before ordering.
- Supply voltage: confirm that your installation is indeed 230V single-phase.
- Thermal protection: if the motor stops repeatedly after a few minutes of running, check for excess pressure in the network, duct ventilation and the electrical supply before assuming the motor is faulty.
Frequently bought together