Extra-flat VMC exhaust unit, 800 m³/h, D250 mm

  • On sale!
Extra-flat enclosure for air injection, transfer, or extraction
Extra-flat VMC exhaust unit, 800 m³/h, D250 mm, vue 2
Ventilation unit for all rooms, 800 m³/h CMV
Ventilation unit for all rooms, 800 m³/h CMV
Extra-thin cabinet, high performance
curve
Extra-flat VMC exhaust unit, 800 m³/h, D250 mm, vue 7
Extraction Chamber Diagram
Video
Extra-flat enclosure for air injection, transfer, or extraction
Extra-flat VMC exhaust unit, 800 m³/h, D250 mm, vue 2
Ventilation unit for all rooms, 800 m³/h CMV
Ventilation unit for all rooms, 800 m³/h CMV
Extra-thin cabinet, high performance
curve
Extra-flat VMC exhaust unit, 800 m³/h, D250 mm, vue 7
Extraction Chamber Diagram

The BFSA extra-flat VMC exhaust unit 800 m³/h in D250 mm fits into the lowest suspended ceilings or lofts, for discreet and effective extract, supply or transfer ventilation.

  • Airflow: approx. 800 m³/h
  • Diameter: D 250 mm
  • Power supply: 230 V single-phase + earth
  • Power: 75 W (0.4 A)
  • Dimensions: L 460 x D 460 x H 300 mm
In stock
Quantity
343.00 415.00 Tax excluded
411,6 € TTC
In stock

Fast delivery
Advisers 5 days a week
Payment in 3 or 4 instalments
 

The BFSA extra-flat VMC exhaust unit is a motorised unit with an airflow of 800 m³/h in 250 mm diameter, designed for ventilation systems with limited space. It can be used for extract, supply or transfer ventilation.

A BFSA unit built for suspended ceilings and low lofts

Its extra-flat design (300 mm high) makes it the ideal choice for installations where every centimetre counts: office suspended ceilings, hard-to-reach lofts, cramped plant rooms. No major works are needed to fit it into an existing professional mechanical ventilation system: it's mounted horizontally, indoors or outdoors.

Technical specifications

Specification Value
Generic reference BFSA
Airflow approx. 800 m³/h
Inlet/outlet diameter 250 mm
Dimensions (L x D x H) 460 x 460 x 300 mm
Power supply 230 V single-phase + earth, 50 Hz
Current 0.4 A
Power 75 W
Weight 15 kg
Made in France
Warranty 1 year

Use and compatibility

This VMC extraction fan box is versatile: it can be installed for extract (removing stale air), supply (bringing in fresh air) or transfer ventilation between two rooms. The direct-drive fan unit features a reaction-type fan and a motor with built-in thermal protection, for efficient ventilation without excess power consumption. The galvanised steel panels and removable screwed cover make long-term maintenance straightforward. This BFSA unit is generally compatible with existing ductwork systems such as Vim KMDT, Aldes Vec, Atlantic Critair or France Air Sirius, thanks to its circular spigots fitted with lip seals.

Installation and connection

The unit can be fixed to the floor or suspended, using its feet with mounting points. It comes supplied with a local isolator switch pre-fitted and wired, as well as a cable grommet to make the electrical connection easier. The electrical connection must be carried out by a qualified professional: this is a condition of the warranty.

Points to check before ordering

  • Check that the D 250 mm diameter matches your existing ductwork or connecting ducts.
  • Check the available height in your suspended ceiling or loft: allow extra clearance beyond the unit's 300 mm height for ducting and connections.
  • Estimate the airflow required for your premises and the number of outlets to serve: actual airflow also depends on elbows, duct length and pressure losses, not just the rated airflow.
  • If noise level is an important factor for your installation, consider comparing with the sound-attenuated version at the same airflow.
  • Make sure the 230 V single-phase power supply matches your electrical installation.

Pairs well with

Need a different airflow for your project? Also available: the 500 m³/h extra-flat VMC unit and the 1500 m³/h exhaust unit, or the sound-attenuated version of the 800 m³/h unit for noise-sensitive installations.

Product Details

Ventilsogood
caissonextraplat8250
Manufacturing
Made in France
Warranty
1 year
Engine
Motorized cabinet
Food
230V Mono
Engine power
0 to 2,000 m³/h
0657968788756

You might also like

8 other products in the same category:

Customers who bought this product also bought:

Frequently asked questions

Is the 800 m³/h D250 BFSA unit compatible with my existing ductwork?

This BFSA unit is fitted with circular spigots with lip seals in 250 mm diameter, generally compatible with existing ductwork systems such as Vim KMDT, Aldes Vec, Atlantic Critair or France Air Sirius. Still check the exact diameter of your ducts before ordering to ensure a connection without further adaptation.

Can the motor speed of this unit be adjusted?

The unit runs on 230 V single-phase, which makes it compatible with a speed controller suited to its current rating. Refer to the motor documentation to stay within the operating range and avoid overheating at low speed.

What's the difference between extract, supply and transfer on this unit?

The same BFSA unit can be used for extract to remove stale air from a room, for supply to bring in fresh air, or for transfer to circulate air between two rooms. The mounting direction and connection determine which function is used.

What suspended ceiling height is needed to install this extra-flat unit?

The unit is 300 mm high. Allow extra clearance in your ceiling void for the D250 mm ducting and its connections, to make installation easier and allow access for future maintenance.

Is this unit suitable for outdoor use?

Yes, the BFSA unit can be installed indoors or outdoors, mounted horizontally. Its galvanised steel panels provide good long-term durability.