VC-FR-12082601982 out-of-warranty charges

Name: VC-FR-12082601982 out-of-warranty charges
Brand: HDLA - Ventilsogood
SKU: surmes
Price: 90 EUR
Availability: InStock

Quantity

90.00 Tax excluded

108 € TTC

Last items in stock

Fast delivery

Advisers 5 days a week

Payment in 3 or 4 instalments

Product Details

Product Details

Reference surmes

Warranty: 1 year

8 other products in the same category:

CR1 fire-resistant 5G cable, 1.5 mm, three-phase 380 V and single-phase 230 V

Ventilation Accessories

CR1 5*1.5mm Fire-Resistant Cable

Ventilsogood

cableCR1anti-feu

5.25 Tax excluded

In stock

CR1 fire-resistant cable, protects the power supply to motors or turrets from fire for 2 hours - 5 wires, 1.5 mm- Sold by the meter (1 unit = 1 meter)- For 220V (3-wire) or 380V 3-phase (5-wire) installation - Compatible with all types of exhaust fans rated below 3,000 W in single-phase 220 V and 8,000 W in three-phase 220–400 V- For all equipment that...

frame / mounting brackets for cabinet motor

Ventilation Accessories

Support feet for worm gear motor with screws and silent blocks

Ventilsogood

piedsuppmotor

20.00 Tax excluded

In stock

Set of 2 support feet for a snail motor (7/7 to 12/12) for mounting the motor in an enclosure. - 2 galvanized snail motor mounting brackets- 6 sizes available- Bag of 6 small screws- 4 vibration dampers to be attached to the brackets (absorb vibrations)

Sound-insulating foam roll for reducing noise from engine compartments

Ventilation Accessories

2 m² Self-Adhesive Soundproofing Roll

Ventilsogood

isolphonique

56.00 Tax excluded

In stock

Insulate your motor housings to reduce noise and vibration! - Dimensions: L 2000 x H 1000 x thickness > 10 mm- One length covers an enclosure measuring approximately 700 x 700 x 700 mm (with two cutouts)- Flat acoustic foam- Self-adhesive- Color: anthracite- Flammability rating per MVSS302 - Indoor installation: potentially flammable- Outdoor...

Ventilation Accessories

45° Galvanized Elbow

Ventilsogood

coude45°

27.00 Tax excluded

In stock

45° Galvanized Steel Elbow - Galvanized steel male fitting- Dimensions: Diameter selectable between 125 mm and 800 mm x Height between 250 and 450 mm depending on diameter- The elbow helps minimize pressure loss and facilitates maintenance Find all related products at the bottom of the page!

Ventilation Accessories

Galvanized Circular Air Control Damper

Ventilsogood

Registre

39.00 Tax excluded

In stock

Manual Adjustment Circular Damper – Controls air intake or exhaust (mechanical ventilation, commercial range hood) Made of galvanized steel – male fitting Easy installation: fits directly between two ducts Available sizes: diameters from 160 to 630 mm Secures in the duct using self-tapping screws (2 gaskets included) Allows for precise adjustment of...

Ventilation Accessories

Commercial Rang Hood Installation Kit: Cabinet—Threaded rods and hardware

Ventilsogood

kitfixhotte

48.00 Tax excluded

In stock

Secure your range hood, cabinet, or clamps permanently with the hardware kit and threaded extensions: - 8 x D 8 mm nuts - 8 x D 8 mm extended nuts, L 20 mm (for connecting two threads) - 8 x double-threaded screws, 120 mm long: 8 mm diameter thread + wood screw (or concrete, rubble, brick, cinder block, etc., with a suitable anchor) - 8 x 1000 mm long...

Saftair side panel for TH36/40/45/50 turret

Roof fan Exhaust Systems for Restaurants & Smoke Exhaust

Roof turret skirting

SAFTAIR

COSTIERE

336.00 Tax excluded

In stock

Saftair mount for flat or sloped roofs. - Compatible with our exhaust turrets (except T11 and T25) or those from SAFTAIR or France air since 2022.- Can be adapted to other brands if the base of the exhaust turret is larger than the roof edge.- Supports a slope of up to 5%- 4 mounting points (bolted) for attaching the exhaust turret to the roof curb.- 3...

Filter for a commercial range hood

G3 Filter for Prefilter Housing

Ventilsogood

G3filtr

12.00 Tax excluded

Last items in stock

G3 filter for pre-filter housing - Traps dust, grease, insects, impurities, etc. - Fits our Model 200, 250, and 315 pre-filter housings.- For supply or exhaust applications.- Must be cleaned regularly with hot water and a degreaser Matching pre-filter housing: G3 filter housing Find all related products at the bottom of the page!