The Mini Activated Carbon Odor-Control Unit + Dual G3 Filter (Ø200 to Ø315), model CHcyl250, is a compact pre-filtration unit that connects directly onto a circular duct, in Ø200, Ø250 or Ø315 mm, to reduce odours and retain some of the dust and grease within a ventilation system.
A compact unit for treating odours on circular ductwork
This activated carbon filter box installs in line, between two sections of ventilation duct, with no major fitting work required. The inlet and outlet spigots are already fixed to the unit, which simplifies connection into an existing ductwork run. It combines 2 x G3 filters with a load of 5 to 7 kg of activated carbon depending on the model, helping to reduce odours while retaining some particles upstream.
Technical specifications
| Specification |
Value |
| Connection diameter |
Ø200, Ø250 or Ø315 mm |
| Filtration |
2 x G3 filters + activated carbon |
| Activated carbon load |
5 to 7 kg depending on model |
| Unit length |
100 to 200 mm |
| Height / width |
250 to 400 mm |
| Manufacturing |
Europe |
| Package weight |
10 kg |
| Warranty |
1 year |
Supply or extract: two possible uses
This mini unit operates passively: it contains no motor and relies on the ventilation already in place on the ductwork. In supply mode, it filters incoming air before it is distributed into the room. In extract mode, it is fitted on the ductwork to filter the air being discharged and limit odours coming from a room or a light-duty hood.
Please note: this compact model is not suitable for installations generating heavy grease and odour loads, in particular with a fryer, plancha or wok. For a commercial kitchen with intensive cooking, a higher-capacity activated carbon cartridge unit, such as the Performance Unit with 6 cartridges, remains better suited.
Maintenance: washable G3 filters, replaceable carbon
The unit opens up to give access to the filters and to replace the activated carbon. The G3 filters are washable in warm water with a degreasing product. Regular maintenance maintains good filtration performance and extends the service life of the activated carbon load.
Installation and connection
The unit can be fitted indoors or outdoors. For outdoor installation, provide a duct or pipe on the outlet side and suitable weatherproofing. The only requirement for warranty purposes is that any electrical connections on the relevant system must be carried out by a qualified professional.
Points to check before ordering
- The exact diameter of your existing duct: Ø200, Ø250 or Ø315 mm, to select the correct version.
- Type of extraction: this unit does not replace dedicated filtration for a fryer, plancha or wok.
- Available space on the ductwork: length 100 to 200 mm and height/width 250 to 400 mm depending on model.
- Fitting direction: supply or extract, depending on your requirement.
- For grease-heavy extraction, suitable upstream filtration reduces clogging of the activated carbon and extends its service life.
Goes well with