The Centrifugal Fan DDM7/9 is a double-inlet centrifugal fan from the German and Italian manufacturer Nicotra Regal, designed for commercial kitchen hoods in restaurants, brasseries, snack bars and fast-food outlets. It delivers an airflow of 2,700 m³/h for a power rating of 300 W.
Double-inlet centrifugal fan DDM7/9 for stainless steel commercial extraction hoods
This Centrifugal Fan DDM7/9 is one of the reliable references in the Nicotra Regal range. Its centred turbine technology reduces vibrations compared to a standard motor unit, for smoother operation. The 6 fixing points ensure even extraction on both sides of the fan, which matters on hoods with heavy use, such as during peak service.
Technical specifications
| Specification |
Value |
| Reference |
DDM7/9 |
| Motor code |
E6G3304 |
| Nicotra reference |
6N02M8 |
| SCT reference |
1F.4P.FL.SCT |
| Motor type |
7/7, 7/9, 8/9 |
| Airflow |
2,700 m³/h |
| Power |
300 W |
| Current |
2.8 A |
| Supply |
230 V single-phase |
| Protection rating |
IP55 |
| Outlet dimensions |
20x30 cm |
| Height |
30 cm |
| Width |
30 cm |
| Minimum compatible hood height |
450 mm |
| Weight |
11 kg |
| Warranty |
1 year |
Compatibility and equivalent references
The DDM7/9 is compatible with most standard commercial kitchen hoods (minimum height 450 mm): GGM Gastro, Saftair, France Air, Alvène, Bertrand, VIM, among others. It corresponds to the following equivalent references from other manufacturers: CBD 1925, 181/241, Nicotra/Regal/Casal/Metro/VIM DD7/9, Sodeca CBD-1925, S&P CBM 7/9, CMC DAIN 7/9, Sisteven DTM-B-7/9. In the event of a stock shortage, this model may be replaced by a CMC DARE 7/9 or an S&P CBM 7/9 300 W, subject to availability.
Installation and wiring
The fan is supplied with its mounting frame and IP55 housing with built-in capacitor, for direct fitting into a stainless steel hood or an extraction fan box. Electrical connections must be carried out by a qualified professional: this is a condition of the warranty.
Need a remote fan unit of the same power? 
Points to check before ordering
- Check the height of your hood: this model is suitable for hoods with a minimum height of 450 mm.
- Check the airflow required based on the length of your hood and your cooking equipment (fryer, plancha, etc.); actual airflow also depends on the ductwork, elbows and duct length.
- Compare the nameplate of your old motor (reference, motor code) with that of the DDM7/9 to confirm compatibility without having to dismantle the whole hood.
- Make sure the available power supply is indeed 230 V single-phase.
- If you want to control the speed, plan for a speed controller sized for this motor.
Recommended with this product
For a more compact installation, also check out our DDM7/7 fan.
Courier delivery: after 2 unsuccessful delivery attempts (premises closed), the parcel will be held for collection at a local pick-up point.